We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two matte black stainless steel adhesive hooks, rectangular with rounded edges, shown as a pair

Aikzik 26LB Heavy-Duty Adhesive Hooks 2 Pack Matte Black

SKU CH-WSKQ-7M4JS

Two stainless-steel hooks hold 26 lb each on smooth surfaces with no drilling required

  • Supports up to 26 lb with industrial-strength adhesive
  • Stainless steel resists corrosion in humid rooms
  • No-drill peel-and-stick install on smooth surfaces
  • Ready for full load after 24-hour cure
  • Two large hooks measure 1.97 by 3.46 inches

Heavy-Duty Adhesive Hooks for Robes and Coats

These Aikzik hooks use industrial-strength adhesive to support up to 26LB on smooth surfaces. Made from stainless steel, they resist corrosion in humid bathrooms or kitchens. The two-pack design suits entryways, showers, or utility rooms where drilling is unwanted. Each hook measures 1.97 by 3.46 inches for a broad bonding area.

Practical Limits of Peel-and-Stick Adhesion

Adhesion works only on smooth surfaces such as tile or glass; textured paint, plaster or wallpaper will not hold. The bond needs 24 hours to reach full strength, so immediate heavy loading risks failure. Maximum rated capacity is 12kg, and exceeding this limit can cause sudden release. Moisture on the surface during application also reduces final holding power.

Straightforward Installation with Common Pitfalls

Installation requires cleaning the surface, pressing firmly for 30 seconds, then waiting 24 hours before hanging anything. The most frequent error is skipping the cure time or applying to a dusty or damp wall. Rough or porous finishes prevent the adhesive from sealing properly. No tools are needed, but surface preparation determines whether the hook stays in place.

Highlights

  • Supports up to 26 lb with industrial-strength adhesive
  • Stainless steel resists corrosion in humid rooms
  • No-drill peel-and-stick install on smooth surfaces
  • Ready for full load after 24-hour cure
  • Two large hooks measure 1.97 by 3.46 inches

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the 2-pack or buy singles for heavier coats?

The 2-pack gives two identical hooks each rated at 26 lb, so you can spread weight across both or use them in separate rooms.

Will the 26 lb rating hold a wet winter coat on tile?

Each hook supports up to 26 lb on smooth tile when the adhesive has cured for 24 hours; the stainless steel resists rust from damp fabric.

Does the adhesive work on textured bathroom walls?

Installation is for smooth surfaces only — tile, glass or polished stone — and requires 30 seconds of firm pressure plus 24 hours cure time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.