AikTryee Laser Level Kit with 8ft Tape Measure
Cross-line laser level with 8 ft tape measure, three bubble vials and ±2 mm accuracy at 10 m and 25 m
- Projects level, plumb and 45° lines for accurate layout
- One slider selects vertical, horizontal or cross laser modes
- Three bubble vials confirm horizontal, vertical and 45° angles
- Class IIIA laser under 5 mW with ±2 mm error at 10 m and 25 m
- 8 ft tape measure with 1/32 in and 1 mm graduations
Multipurpose Laser Level Kit
The AikTryee laser level projects vertical, horizontal and cross lines for indoor alignment tasks such as hanging shelves, cabinets, tiles and picture frames. A single front slider selects the required line mode. The device is a Class IIIA laser with maximum output below 5 mW.
DIY users needing basic indoor layout
Suitable for homeowners and hobbyists who want a simple cross-line reference for small projects. Not intended for buyers who need self-levelling, outdoor visibility or extended working range beyond the stated accuracy limits. Professionals requiring certified calibration should look elsewhere.
Includes 8 ft tape measure
The kit bundles an 8 ft (2.5 m) tape measure graduated in 1/32 inch and 1 mm increments. Three bubble vials at 0°, 45° and 90° provide additional plane verification. No batteries, mounts or carrying case are mentioned in the supplied data.
Highlights
- Projects level, plumb and 45° lines for accurate layout
- One slider selects vertical, horizontal or cross laser modes
- Three bubble vials confirm horizontal, vertical and 45° angles
- Class IIIA laser under 5 mW with ±2 mm error at 10 m and 25 m
- 8 ft tape measure with 1/32 in and 1 mm graduations
Specifications
No published specifications for this item yet.
Questions about this item
Does the laser level need a tripod or wall mount to project a straight line?
The tool projects vertical, horizontal and cross lines from its built-in base; no separate mount is mentioned in the specifications.
Can I still use my traditional spirit level alongside this laser level for the same job?
Yes — the kit includes 0°, 90° and 45° bubble vials so you can cross-check the laser lines with a conventional level.
How do I verify the laser is accurate after I turn it on?
The manufacturer rates the measuring error at ±2 mm at 10 m and 25 m; compare the projected line to a known reference at those distances.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
