aibileec
aibileec PCIe 6Pin to 3 SATA 15Pin Power Cable 18AWG 50+15+15cm
Splits one PCIe 6-pin connector into three SATA 15-pin power leads for Corsair SF450, SF600 and SF750 SFX units using 18AWG UL 1007 tinned copper wire
- ColorBlack
- Powers three SATA drives from one PCIe 6-pin connector
- 18AWG tinned copper wire handles high current safely
- Flat ribbon design stays flexible for tight cable runs
- 50 cm lead plus two 15 cm branches reach multiple bays
- Tested compatible with Corsair SF450 SF600 SF750 SFX PSUs
PCIe 6-Pin to Triple SATA Power Cable
This cable converts a single PCIe 6-pin connector from a modular power supply into three SATA 15-pin power connectors. It is designed for builders adding multiple SATA solid-state drives or hard drives to a system using a compatible Corsair SFX unit. The 18AWG tinned copper conductors handle the power delivery required for typical storage arrays.
Sustained Load Behaviour
The UL 1007 rated 18AWG ribbon cable maintains stable current delivery across all three SATA connectors during continuous drive operation. Tinned copper resists oxidation better than bare copper, preserving conductivity over long periods. The flat ribbon construction reduces internal resistance and heat buildup when multiple drives spin up simultaneously.
Compatibility Constraint
This cable is wired specifically for Corsair SF450, SF600 and SF750 SFX full-modular power supplies. Pin-outs differ between brands and even between modular lines, so using it with any other PSU risks incorrect voltage sequencing and potential drive damage. Verify the exact PSU model before connecting.
Highlights
- Powers three SATA drives from one PCIe 6-pin connector
- 18AWG tinned copper wire handles high current safely
- Flat ribbon design stays flexible for tight cable runs
- 50 cm lead plus two 15 cm branches reach multiple bays
- Tested compatible with Corsair SF450 SF600 SF750 SFX PSUs
Specifications
| Color | Black |
|---|
Questions about this item
Will the 18AWG cable run warm when powering three SATA drives all day?
The 18AWG tinned copper conductors are rated for high current and the UL 1007 insulation resists heat, so the cable stays cool under continuous load.
Do I need a Corsair SF450 SF600 or SF750 SFX modular PSU to use this cable?
Yes, the 6-pin PCIe connector is wired for Corsair SF450, SF600 and SF750 SFX full-modular units; other PSUs may have different pinouts.
Can I keep using my older SATA SSDs and hard drives with this adapter?
The three 15-pin SATA connectors supply standard power to any SATA drive, so legacy SSDs and mechanical drives work without changes.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



