We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten colour-coded alligator-clip test leads, 20.5 in, 22 AWG copper wire

aFe Power WG-026 10-piece 5-color test lead set 20.5 in 22 AWG electrical system tool

SKU CH-BDJ0-EHFDW MPN WG-026

Ten-piece test lead set with five colour-coded alligator clips on 20.5 inch 22 AWG copper wire for organised electrical diagnostics

  • FeaturesCorded Electric, false
  • Height20.5 L x 0.5 W x 0.5 H inches
  • Width20.5 L x 0.5 W x 0.5 H inches
  • Length20.5 L x 0.5 W x 0.5 H inches
  • Weight3.5 ounces
  • TypeClamp
  • 10 test leads in five colours for quick circuit identification
  • 5 in 22 AWG copper wire with PVC insulation for flexible, safe connections
  • 6 in nickel-plated steel alligator clips soldered and stamped for secure grip
  • UL, CE and RoHS specifications met for compliance confidence
  • Lightweight 3.5 oz set suits bench, lab, workshop and field diagnostics

10-Piece 5-Color Test Lead Set

This aFe Power WG-026 kit supplies ten alligator-clip leads in five colours — red, black, yellow, green and white — for quick circuit identification. The 22 AWG copper conductors are PVC-insulated and measure 20.5 inches from end to end, giving ample reach for breadboarding, prototyping and general electrical diagnostics. Each clip is soldered and stamped to the wire for reliable conductivity.

Soldered Clips And PVC Insulation

Nickel-plated steel jaws with strong springs grip terminals tightly, while vinyl-coated PVC insulation protects against accidental shorts during bench work. The cords are not corded-electric powered and require no batteries, so they add no heat or electrical noise to sensitive low-voltage measurements. At 3.5 ounces total weight the set remains light enough to hang from a test point without strain.

Extended Bench And Field Use

UL, CE and RoHS markings confirm compliance for laboratory, workshop and classroom environments. The 1.6-inch clip length accommodates a range of component leads and screw terminals, supporting prolonged troubleshooting sessions without clip fatigue. A 12-month manufacturer warranty covers the complete pack for worry-free ownership.

Highlights

  • 10 test leads in five colours for quick circuit identification
  • 5 in 22 AWG copper wire with PVC insulation for flexible, safe connections
  • 6 in nickel-plated steel alligator clips soldered and stamped for secure grip
  • UL, CE and RoHS specifications met for compliance confidence
  • Lightweight 3.5 oz set suits bench, lab, workshop and field diagnostics

Specifications

BrandaFe Power
FeaturesCorded Electric, false
Height20.5 L x 0.5 W x 0.5 H inches
Width20.5 L x 0.5 W x 0.5 H inches
Length20.5 L x 0.5 W x 0.5 H inches
Weight3.5 ounces
TypeClamp

Questions about this item

How do I connect the 20.5-inch 22 AWG leads to a breadboard without damaging the pins?

Push the 1.6-inch nickel-plated alligator clips onto component legs or header pins; the soldered-and-stamped joints keep the 22 AWG copper wire from pulling loose while you reposition the board.

Which part of the 10-piece 5-color set wears out first with daily lab use?

The PVC insulation on the 22 AWG copper wire will crack before the nickel-plated steel clips lose spring tension, so plan to replace individual leads when the coating shows splits.

At what current do the 22 AWG copper leads become the limiting factor during a long test session?

The 22 AWG copper wire reaches its safe ampacity well before the nickel-plated clips or soldered joints overheat, so sustained loads above a few amps will hit the wire limit first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.