We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow plastic pen-style tester with pocket clip and probe tip

aFe Power NCVT2P Dual Range Non-Contact Voltage Tester 12-1000V AC

SKU CH-MC4B-M8YPV

Detects 12–1000 V AC in dual ranges with visual and audible alerts, CAT IV 1000 V rated, auto power-off, pocket clip, 0.05 lb

  • FeaturesDual Range Non-Contact Voltage Tester 12 - 1000V AC, Ce, Iec
  • Height5.82 L x 1.09 W x 0.86 H inches
  • Width5.82 L x 1.09 W x 0.86 H inches
  • Length5.82 L x 1.09 W x 0.86 H inches
  • Weight0.05 pounds
  • Sports Team1 Piece
  • Dual-range 12-1000V AC detection covers low and standard voltage
  • Visual and audible alerts give immediate voltage presence confirmation
  • CAT IV 1000V rating and IEC 61010-1 compliance for high safety
  • Auto power-off extends battery life during field use
  • Compact 5.82 x 1.09 x 0.86 in design with pocket clip for portability

Dual-Range Voltage Tester 12-1000V AC

The aFe Power NCVT2P detects alternating current from 12 to 1000 volts without touching conductors. It serves electricians, technicians and installers who need to verify live circuits in residential, commercial and low-voltage systems such as security or irrigation wiring.

Installation and Common Issues

Operation requires only selecting the 12-1000V or 70-1000V range and holding the tip near the conductor; green light confirms power on, while red light and tone signal voltage presence. False readings can occur near strong electromagnetic fields, and the tester cannot detect voltage through shielded cable or inside grounded metal conduit.

CAT IV 1000V Safety Limits

The CAT IV 1000V rating covers measurements at the service entrance and outdoor conductors but does not extend to higher-energy distribution busbars. Non-contact detection cannot measure exact voltage value, identify DC voltage or confirm circuit continuity, so a multimeter remains necessary for quantitative diagnostics.

Highlights

  • Dual-range 12-1000V AC detection covers low and standard voltage
  • Visual and audible alerts give immediate voltage presence confirmation
  • CAT IV 1000V rating and IEC 61010-1 compliance for high safety
  • Auto power-off extends battery life during field use
  • Compact 5.82 x 1.09 x 0.86 in design with pocket clip for portability

Specifications

BrandaFe Power
FeaturesDual Range Non-Contact Voltage Tester 12 - 1000V AC, Ce, Iec 61010-1, Battery Powered, true
Height5.82 L x 1.09 W x 0.86 H inches
Width5.82 L x 1.09 W x 0.86 H inches
Length5.82 L x 1.09 W x 0.86 H inches
Weight0.05 pounds
Sports Team1 Piece

Questions about this item

How can I confirm the tester is operating correctly after turning it on?

Press the power button; the green LED should illuminate and a brief tone sounds, showing the self-test passed before you bring the tip near any conductor

What items are included with the tester and what must I purchase separately?

The NCVT2P tester ships with a pocket clip installed; two AAA batteries are required but not supplied

When should I select the 12-48V mode versus the 70-1000V mode?

Use the 12-48V setting for doorbell, thermostat or irrigation wiring; switch to 70-1000V for mains circuits, breakers, outlets and light fixtures

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.