We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow handheld digital clamp meter with large jaws and colour backlit display

aFe Power CM87Pro Digital Clamp Meter 6000 Counts 1000A

SKU CH-YPCB-SX5PD

True-RMS clamp meter measures up to 1000 A AC/DC with 6000-count resolution, plus inrush current, VFD, LoZ, NCV, temperature and capacitance functions

  • FeaturesAC DC Clamp Meter, Iec 61010-1, Battery Powered, true
  • Height8.58 L x 2.95 W x 1.54 H inches
  • Width8.58 L x 2.95 W x 1.54 H inches
  • Length8.58 L x 2.95 W x 1.54 H inches
  • Weight0.54 pounds
  • Sports Team1 Piece
  • True RMS 6000-count resolution gives precise readings
  • Inrush current capture up to 1000 A diagnoses motor starts
  • VFD and LoZ modes measure drives and remove ghost voltage
  • Colour backlit display with NCV and flashlight aids dark work
  • IEC 61010-1 rated for safe professional use

aFe Power CM87Pro 6000-Count Clamp Meter

The aFe Power CM87Pro is a 6000-count digital clamp meter rated for 1000 A AC/DC current and 1000 V. It measures AC/DC voltage, current, capacitance, resistance, continuity, diode, frequency and temperature. True RMS sensing and IEC 61010-1 compliance suit professional electricians and experienced DIY users troubleshooting automotive, solar or industrial electrical systems.

Inrush VFD LoZ NCV Features

Inrush current measurement up to 1000 A in AC mode captures motor-start transients for faster fault finding. Variable frequency drive (VFD) mode and low-impedance (LoZ) voltage function suppress ghost voltages on drive outputs. Non-contact voltage (NCV) detection with audible and visual alerts plus a built-in LED flashlight and colour backlit display improve safety and readability in dim locations.

Battery-Powered Handheld Installation

The meter arrives ready to use with batteries installed; open the jaw, select the function and clamp around a single conductor. The 8.58 by 2.95 by 1.54 inch body weighs .54 pounds and fits tight panels. Common issues: forgetting to zero the DC current offset before measuring, selecting the wrong range for inrush capture, or reading ghost voltage without engaging LoZ mode.

Highlights

  • True RMS 6000-count resolution gives precise readings
  • Inrush current capture up to 1000 A diagnoses motor starts
  • VFD and LoZ modes measure drives and remove ghost voltage
  • Colour backlit display with NCV and flashlight aids dark work
  • IEC 61010-1 rated for safe professional use

Specifications

BrandaFe Power
FeaturesAC DC Clamp Meter, Iec 61010-1, Battery Powered, true
Height8.58 L x 2.95 W x 1.54 H inches
Width8.58 L x 2.95 W x 1.54 H inches
Length8.58 L x 2.95 W x 1.54 H inches
Weight0.54 pounds
Sports Team1 Piece

Questions about this item

How often will the battery need replacing on the CM87Pro?

The meter is battery powered and includes a low-battery indicator; replace the cells when that symbol appears on the 6000-count display.

What measurement range hits its ceiling first during continuous high-current work?

AC current measurement stops at 1000 A, which is the highest range the clamp can read.

Does the CM87Pro get hot or noisy when left on all day?

The clamp meter has no fan or moving parts, so it runs silently and stays at ambient temperature during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.