We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow plastic tone generator and probe kit, rectangular transmitter with clip leads and wand receiver, 9.1 by 2.2 by 1.1 inches

aFe Power 77HP2 Tone Generator and Probe Kit

SKU CH-ZYBM-4DQWS

Traces cables, identifies faults and tests line status with selectable tones and a built-in speaker

  • Featurestoner electrical tool, Battery Powered, false
  • Height3.5 L x 2.7 W x 1.5 H inches
  • Width3.5 L x 2.7 W x 1.5 H inches
  • Length3.5 L x 2.7 W x 1.5 H inches
  • Sports Team1 Piece
  • TypeClamp
  • Identifies cables in one second with selectable continuous or variable tone generator
  • Traces circuits through walls using 200EP inductive amplifier with nominal 30dB gain
  • Tests line tracking, short circuits and clear/busy/ringing status on telecom and network lines
  • Clamp mode enables direct measurement on non-terminal cables without damaging insulation
  • Operates from 0 to 50 °C with two 9V batteries (not included)

aFe Power 77HP2 Tone and Probe Kit

The aFe Power 77HP2 is a tone generator and probe kit designed for telecommunications technicians and network engineers who trace and identify cables. It handles line tracking, short-circuit testing, and clear/busy/ringing status recognition on telephone and data wiring. The kit includes both generator and inductive amplifier probes for complete circuit verification.

Clamp-style probe with 30 dB gain

The probe uses a clamp measurement mode that allows non-contact tracing on non-terminated cables without damaging insulation. Its professional plastic carbon-fibre test head prevents accidental shorts while the nominal 30 dB gain and 100 MΩ input impedance provide sensitive signal detection. Adjustable volume and a built-in speaker give immediate audible feedback during tracing tasks.

Operates on two 9 V batteries

The unit requires two 9 V batteries (NEDA 1604, JIS 006P, or IEC 6LR61) which are not supplied, so users must source them separately. Selectable continuous or variable tone generation simplifies one-button operation for quick cable identification. The tester functions within a 0–50 °C temperature range for use in varied indoor environments.

Highlights

  • Identifies cables in one second with selectable continuous or variable tone generator
  • Traces circuits through walls using 200EP inductive amplifier with nominal 30dB gain
  • Tests line tracking, short circuits and clear/busy/ringing status on telecom and network lines
  • Clamp mode enables direct measurement on non-terminal cables without damaging insulation
  • Operates from 0 to 50 °C with two 9V batteries (not included)

Specifications

BrandaFe Power
Featurestoner electrical tool, Battery Powered, false
Height3.5 L x 2.7 W x 1.5 H inches
Width3.5 L x 2.7 W x 1.5 H inches
Length3.5 L x 2.7 W x 1.5 H inches
Sports Team1 Piece
TypeClamp

Questions about this item

What input impedance does the probe present to the circuit under test?

The probe input impedance is nominal 100M Ohm, so it loads the line very lightly while tracing or identifying faults.

What are the exact dimensions of the probe for tool-bag space planning?

The probe measures approximately 231 x 55 x 28 mm (9.1 x 2.2 x 1.1 in) and weighs about 300 g (10.6 oz).

How do I power the kit for the first trace, and what mistake should I avoid?

Install two 9 V batteries (NEDA 1604, JIS 006P or IEC 6LR61) — not included — and never connect the unit to a line carrying strong current.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.