We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aeromotive 11182 Pro-Series electric fuel pump, metallic cylindrical body with electrical connector

AEROMOTIVE

AEROMOTIVE 11182 Pro-Series Electric Fuel Pump 1700 lbs/hr 40 psi

SKU CH-P7FN-TFYEZ

High-flow electric fuel pump delivering 1,700 lbs/hr at 40 psi with brushless controller for EFI and carbureted engines up to 3,400 FWHP

  • Supports fuel-injected engines up to 3400 FWHP
  • Carbureted engines reach 3600 FWHP naturally aspirated
  • New spur-gear mechanism extends service life with methanol and ethanol
  • Brushless controller reduces current draw at 40 psi EFI pressure
  • E85 compatible with 30 percent maximum FWHP reduction

High-Capacity Fuel Pump

The Aeromotive 11182 Pro-Series electric fuel pump is built for high-performance fuel-injected and carbureted engines. It uses an integral spur-gear mechanism and an external brushless controller for cooler fuel delivery and extended service life with methanol or ethanol blends. The in-line design is lighter than traditional external-mount pumps. It supports E85 with a thirty percent reduction in maximum flywheel horsepower.

Flow Ratings and Headroom

At 40 psi and 13.5 volts the pump delivers 1,700 lbs/hr for EFI applications and 1,850 lbs/hr at 9 psi for carbureted use. Higher-pressure EFI flow is rated at 700 lbs/hr at 45 psi while carbureted flow reaches 900 lbs/hr at 9 psi. These figures cover naturally aspirated engines up to 3,400 FWHP and forced-induction up to 2,600 FWHP for EFI, or 3,600 FWHP naturally aspirated and 2,700 FWHP forced for carbureted setups. A separate regulator is required.

Brushless Controller Integration

The integral external brushless controller simplifies installation, reduces current draw at higher EFI pressures and keeps fuel temperatures lower for enhanced reliability. This feature distinguishes the Pro-Series design from conventional pump configurations.

Highlights

  • Supports fuel-injected engines up to 3400 FWHP
  • Carbureted engines reach 3600 FWHP naturally aspirated
  • New spur-gear mechanism extends service life with methanol and ethanol
  • Brushless controller reduces current draw at 40 psi EFI pressure
  • E85 compatible with 30 percent maximum FWHP reduction

Specifications

BrandAeromotive

Questions about this item

Will the 1700 lbs/hr at 40 psi flow support my existing fuel lines and regulator?

The pump delivers 1700 lbs/hr at 40 psi and 13.5 volts for EFI applications. A regulator is not included, so your existing regulator must handle this flow and pressure.

How can I verify the pump is performing correctly after installation?

Measure fuel pressure at the rail — it should hold 40 psi at 13.5 volts with the engine running. Flow should reach 1700 lbs/hr for EFI or 1850 lbs/hr at 9 psi for carbureted use.

What comes in the box and what must I supply separately?

The pump includes an integral spur-gear mechanism and external brushless controller. A regulator is not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.