Advanced Lamps
Advanced Lamps PT-DS100-2PK-LAMP-A DLP Replacement Lamp TwinPack
Twin-pack of 355 W replacement lamps rated for 3,000 hours at full power or 4,000 hours in eco mode, weighing 1.9840 kg
- TypeProject Lamp
- Weight1.9840
- TwinPack covers two projector lamp changes
- 355 W genuine AL Series lamp delivers rated brightness
- 3 000 hours full power or 4 000 hours eco-mode
- 90 day warranty backs the new modules
- 9840 kg total weight simplifies handling
TwinPack DLP Replacement Lamps
This TwinPack contains two lamp-and-housing modules built for the Panasonic PT-DS100 projector. Each module uses a 355W Genuine AL Series lamp and arrives new. The twin format suits venues or owners who want a spare on hand without reordering.
Thermals Noise and Power Draw
Each lamp runs at 355 watts in normal operation. The projector’s own cooling system manages the thermal load, so acoustic output and power draw follow the host unit’s standard behaviour. No separate fan or power supply is included with the modules.
Sustained Load Behaviour
The lamp is rated for 3,000 hours at full power and 4,000 hours in eco mode. Output remains stable across those intervals before a scheduled change is due. The 90-day warranty covers early failure during that period.
Highlights
- TwinPack covers two projector lamp changes
- 355 W genuine AL Series lamp delivers rated brightness
- 3 000 hours full power or 4 000 hours eco-mode
- 90 day warranty backs the new modules
- 9840 kg total weight simplifies handling
Specifications
| Brand | Advanced Lamps |
|---|---|
| Model | PT-DS100-2PK-LAMP-A |
| Part Number | PT-DS100-2PK-LAMP-A |
| Type | Project Lamp |
| Weight | 1.9840 |
Questions about this item
How do I install the TwinPack lamp and housing in my Panasonic PT-DS100 projector?
Power off and unplug the projector, let it cool completely, remove the lamp cover, loosen the retaining screws, pull out the old module by its handle, slide the new housing in until it clicks, retighten the screws, replace the cover, then reset the lamp timer in the menu — the step most people skip.
What maintenance will the 355W AL Series lamps need after installation?
Clean the air filters every few months to prevent overheating; each lamp is rated for 3,000 hours at full power or 4,000 hours in eco mode, after which the entire housing must be replaced.
What limit appears first during long sessions with these 355W lamps?
The 3,000-hour full-power rating (or 4,000 hours in eco mode) is the first hard limit — once reached the lamp must be swapped even if it still strikes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



