Advanced Lamps
Advanced Lamps Polaview-340-LAMP-A DLP Replacement Lamp
Replacement lamp and housing module for the Polaroid Polaview 340 projector, supplied new with a 90 day warranty
- TypeProject Lamp
- Weight0.9900
- Compatible with Polaroid Polaview 340 projector
- Ready-to-install lamp and housing module
- Genuine AL Series lamp technology inside
- 90 day warranty coverage included
- Lightweight design at .9900 weight units
Compatible Replacement Lamp for Polaroid Polaview
This aftermarket lamp and housing module fits the Polaroid Polaview 340 projector. It uses a genuine AL Series lamp inside a new housing. The unit is sold new and carries a 90 day warranty from the supplier. It restores brightness when the original lamp reaches end of life.
Direct Fit Installation With Pre Assembled Housing
The lamp ships already mounted in its housing so no separate bulb handling is required. Align the module with the projector’s lamp compartment and secure it using the existing screws. The most common issue is forgetting to reset the lamp hour counter in the projector menu after replacement. Dust on the lens or filter can also dim the image if not cleaned at the same time.
Verify Projector Model And Lamp Code Before Ordering
Confirm that your projector is the Polaroid Polaview 340 and that the part number Polaview-340-LAMP-A matches the label on your current lamp module. Check that the lamp compartment is free of debris and that the cooling fans operate normally. Ensure the projector powers on and completes its start up sequence before fitting the new module.
Highlights
- Compatible with Polaroid Polaview 340 projector
- Ready-to-install lamp and housing module
- Genuine AL Series lamp technology inside
- 90 day warranty coverage included
- Lightweight design at .9900 weight units
Specifications
| Brand | Advanced Lamps |
|---|---|
| Model | Polaview-340-LAMP-A |
| Part Number | Polaview-340-LAMP-A |
| Type | Project Lamp |
| Weight | 0.9900 |
Questions about this item
How can I verify the lamp is working correctly after installing it in my Polaview 340 projector?
Power on the projector and confirm the image appears with normal brightness and no warning indicators; the lamp should strike immediately and run without flickering.
What components are included with the Polaview-340-LAMP-A and what must I purchase separately?
The unit ships as a complete lamp and housing module ready for installation; no additional parts are required for the Polaview 340 projector.
Which version of this lamp should I select for my Polaroid Polaview 340?
Choose the Polaview-340-LAMP-A part number; it is the specific lamp and housing assembly guaranteed compatible with the Polaview 340 model.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



