We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular projector lamp module in plastic housing, metal connector visible, .9900 weight

Advanced Lamps

Advanced Lamps ET-LAC50-A DLP Replacement Lamp for Panasonic PT-LC70, PT-LC150, LX-P1010

SKU CH-P02K-F9P06

DLP replacement lamp and housing compatible with Panasonic PT-LC70, PT-LC150 and LX-P1010 projectors

  • TypeProject Lamp
  • Weight0.9900
  • Fits Panasonic PT-LC70, PT-LC150, LX-P1010 projectors
  • Ready-to-install lamp and housing module
  • Genuine AL Series lamp for reliable brightness
  • 90-day warranty backs the replacement
  • Lightweight unit at .9900 weight measure

Compatible Panasonic Projector Models

The Advanced Lamps ET-LAC50-A replaces the lamp and housing assembly in Panasonic PT-LC70, PT-LC150 and LX-P1010 series projectors. It is built as a complete module so the user does not need to handle a bare bulb. The part number matches the original ET-LAC50 code for direct substitution.

Pre-Assembled Housing Benefit

The lamp ships inside its housing, which removes the alignment and seating steps required by bare-lamp replacements. This reduces the risk of dust contamination on the optical path during installation. The genuine AL Series lamp is already secured to the chassis by the supplier.

Tool-Free Installation Notes

Most Panasonic models in this range use a single captive screw or latch for the lamp door, so no special tools are required. The housing keys into the projector in one orientation, preventing incorrect insertion. Users should allow the unit to cool fully before starting the swap to avoid thermal shock to the new lamp.

Highlights

  • Fits Panasonic PT-LC70, PT-LC150, LX-P1010 projectors
  • Ready-to-install lamp and housing module
  • Genuine AL Series lamp for reliable brightness
  • 90-day warranty backs the replacement
  • Lightweight unit at .9900 weight measure

Specifications

BrandAdvanced Lamps
ModelET-LAC50-A
Part NumberET-LAC50-A
TypeProject Lamp
Weight0.9900

Questions about this item

How often will the ET-LAC50-A lamp module need to be replaced under typical daily projection?

The lamp is rated for 50 hours of operation before brightness drops to half, so replacement timing depends on your daily usage hours.

What component reaches its limit first during continuous all-day projection?

The lamp's 50-hour rated life is the primary limit; after that period light output falls to 50 percent and the module should be swapped.

How much heat and fan noise does the lamp add when the projector runs for a full day?

The lamp operates within the projector's original thermal design, so heat and noise remain at the levels specified for the PT-LC70, PT-LC150 and LX-P1010 models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.