We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare projector lamp module with exposed bulb and connector

Advanced Lamps

Advanced Lamps 9281-288-05390-CB 330W/264W 1.3 E19.9 dlp replacement lamp

SKU CH-7791-64CM6

A 330W/264W 1.3 E19.9 bare projector lamp replaces part 9281-288-05390 for compatible NEC models

  • TypeProject Lamp
  • Weight0.7500
  • Replaces multiple NEC projector models including NP3150 and NP3250
  • Dual 330W/264W power modes suit different brightness needs
  • 3 E19.9 lamp specification matches original equipment requirements
  • Bulb-only design reduces replacement cost versus full module
  • 90-day warranty covers early-life performance issues

Direct replacement for NEC projectors

This Advanced Lamps 9281-288-05390-CB module is a bare DLP replacement lamp rated at 330W and 264W with a 1.3 E19.9 specification. It replaces the original part number 9281-288-05390 across multiple NEC projector models including the NP1150, NP1250, NP2150, NP2250, NP3150, NP3151, NP3151W, NP3200, NP3250 and NP3250W. The unit weighs .7500 and is supplied new.

Tested for consistent output over long sessions

The lamp is manufactured as a high-quality tested replacement designed to provide the same performance as the original component throughout extended use. Its dual-wattage rating supports stable operation during sustained projection periods without the brightness drop-off that can affect untested alternatives. The bare bulb format means it installs directly into the existing housing.

Upgrades from dim or failed original lamps

This part replaces an ageing or failed UHP 330-264W 1.3 E 19.9 lamp in compatible NEC projectors. The jump is worth it when the current lamp has reached its rated hours, shows significant brightness loss or exhibits colour shifting. It is not for users whose projectors require a complete lamp housing assembly rather than a bare bulb, or for models outside the listed NP series.

Highlights

  • Replaces multiple NEC projector models including NP3150 and NP3250
  • Dual 330W/264W power modes suit different brightness needs
  • 3 E19.9 lamp specification matches original equipment requirements
  • Bulb-only design reduces replacement cost versus full module
  • 90-day warranty covers early-life performance issues

Specifications

BrandAdvanced Lamps
Model9281-288-05390-CB
Part Number9281-288-05390-CB
TypeProject Lamp
Weight0.7500

Questions about this item

How much power does the 330W/264W lamp draw during extended daily use?

The lamp operates at 330 watts in normal mode and 264 watts in economy mode, so continuous daily running will draw within that range depending on the projector setting.

Which projector models must I already own for this 9281-288-05390-CB bulb to fit?

It replaces the original lamp in NEC NP1150, NP1250, NP2150, NP2250, NP3150, NP3151, NP3151W, NP3200, NP3250, NP3250W and NP06LP projectors.

Will the 1.3 E19.9 bulb work alongside the older NP3150 lamp I keep as a spare?

Yes, the 1.3 E19.9 specification matches the original NP3150 lamp, so either can be used in the same projector without compatibility issues.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.