We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular electronic ballast with side wiring terminals

Advance

Advance ICN-2S54-90C-N Electronic Ballast 117-120W 1-2 Lamps

SKU CH-KCQ6-E6D91

Electronic fluorescent ballast operates one or two T5HO lamps up to 54 watts each on 120 to 277 volt input with rapid start down to minus 20 degrees Fahrenheit

  • typeBallasts
  • Rapid start ignites lamps quickly in cold areas down to -20 °F
  • Centium electronic circuitry drives one or two T5HO lamps efficiently
  • Universal 120–277 V input fits most commercial wiring without rewiring
  • Supports up to 54 W per lamp for bright, consistent output
  • Operates 1–2 lamps from a single ballast reducing fixture count

Advance Centium Ballast for T5HO Lamps

The Advance ICN-2S54-90C-N is an electronic ballast designed to operate one or two T5HO fluorescent lamps. It supports a maximum lamp wattage of 54 W per bulb across a universal input voltage range of 120 to 277V AC. This unit suits commercial or residential fixtures requiring rapid-start operation for linear fluorescent lighting.

Cold-Weather Starting and Fixed Output

The ballast provides reliable rapid starting down to a minimum temperature of -20 degrees F, making it suitable for unheated spaces or outdoor enclosures. It delivers a fixed light output with no dimming capability, drawing between 117 and 120 watts total depending on the number of lamps installed. Operation is silent and free of the flicker associated with magnetic predecessors.

Ready for Standard Wiring Installations

The package contains the ballast unit only; no lamps, sockets, or mounting hardware are bundled. Installers must supply compatible T5HO lamps and appropriate wiring for the 120 to 277V supply. The absence of dimming circuitry simplifies the connection to a standard on-off switch or occupancy sensor.

Highlights

  • Rapid start ignites lamps quickly in cold areas down to -20 °F
  • Centium electronic circuitry drives one or two T5HO lamps efficiently
  • Universal 120–277 V input fits most commercial wiring without rewiring
  • Supports up to 54 W per lamp for bright, consistent output
  • Operates 1–2 lamps from a single ballast reducing fixture count

Specifications

BrandADVANCE
typeBallasts

Questions about this item

How do I wire the Centium ICN-2S54-90C-N for one or two T5HO lamps on a 120 to 277 V supply?

Connect the line and neutral to the input leads matching your supply voltage, then wire the lamp holders to the red and blue output leads for two lamps or cap the unused lead for one lamp, observing the rapid-start wiring diagram on the label.

What part of the ICN-2S54-90C-N will need replacement first in a commercial installation?

The ballast itself is the service item; when lamps flicker, fail to ignite at the rated -20 °F minimum start temperature, or the case shows discolouration, replace the unit.

What thermal limit appears first when the ICN-2S54-90C-N runs continuously at full load?

The case temperature will reach its rated maximum before any other parameter; ensure the mounting surface allows heat dissipation and that ambient temperature stays within the ballast's design range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.