Adoreen Non-Polarized Power Cord 10 ft 1-15P to C7 18/2 AWG ETL White Ties
A 10-foot non-polarized 1-15P to C7 power cord with 18 AWG copper conductors, ETL certification and 15 cable ties included
- Length10 feet
- Connector DetailMale-to-Female
- SpecificationsVoltage: 125 volts; Connector: Male-to-Female
- 10 ft cord reaches distant outlets easily
- 18 AWG pure copper conductors reduce heat and energy loss
- ETL-certified plugs and cable meet US safety standards
- Flame-retardant PVC jacket withstands 105 °C operating temperature
- 15 included cable ties keep wiring neat and organised
Non-Polarized 1-15P to C7 Cord
This ten-foot replacement cord connects a standard North American wall outlet to devices that use an IEC 320 C7 inlet. It is built for televisions, monitors, game consoles and similar equipment that require a non-polarized two-prong supply. The white PVC jacket and included cable ties keep the installation tidy in home or office settings.
18 AWG Two-Core Copper Conductor
The cord uses 18 AWG oxygen-free copper conductors rated for 7 amps at 125 volts. Pure copper lowers resistance, reduces heat and minimises energy loss during operation. Both moulded plug ends and the cable body carry ETL certification and meet FT2 and VW-1 flame-retardant standards.
Sustained Operation Up To 105 °C
Thickened flame-retardant insulation is rated for continuous operating temperatures up to 105 °C, preventing overheating or melting during prolonged use. Nickel-plated prongs resist wear and deformation through repeated insertion cycles. The one-piece moulded plugs maintain a tight, secure connection without loosening over time.
Highlights
- 10 ft cord reaches distant outlets easily
- 18 AWG pure copper conductors reduce heat and energy loss
- ETL-certified plugs and cable meet US safety standards
- Flame-retardant PVC jacket withstands 105 °C operating temperature
- 15 included cable ties keep wiring neat and organised
Specifications
| Brand | Adoreen |
|---|---|
| Length | 10 feet |
| Connector Detail | Male-to-Female |
| Specifications | Voltage: 125 volts; Connector: Male-to-Female |
Questions about this item
What does the 7 A / 125 V rating mean once the cord is plugged into my equipment?
It means the cord can safely carry up to 7 amps at 125 volts, so any device drawing within that limit — most small TVs, monitors, game consoles or laptop power bricks — will run without the cable overheating.
The cord uses a 1-15P plug and a C7 connector; what does that cap in practice?
The 1-15P end fits standard North American two-prong wall outlets, while the C7 end mates with the figure-8 inlet found on many TVs, sound bars, game consoles and some laptop adapters, limiting use to devices with that specific inlet.
What clearance does the 5.9 mm diameter cable and its moulded plugs need to fit behind furniture?
The cord itself is 5.9 mm thick, and the one-piece moulded plugs add only a few millimetres beyond the pins, so a gap of roughly 15 mm behind a sofa or monitor is enough for a clean, flat run.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



