We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of ten gray electrical tape rolls in individual cello wrap

ADHESIVE TAPE PRODUCTS, LTD.

ADHESIVE TAPE PRODUCTS, LTD. Electrical Tape Gray Pack of 10

SKU CH-FNPB-GA98S

Professional-grade PVC electrical tape in gray, UL/CSA listed for 600 V and 176 °F, 66 ft per roll, pack of 10

  • TypeElectrical Tape
  • ColorGray

Color Gray

  • Professional-grade PVC film resists flame and cold
  • Rubber-resin adhesive bonds aggressively to wire and cable
  • UL and CSA listed for use up to 600 V and 176 °F
  • Eleven OSHA colours enable instant circuit identification
  • Ten individually wrapped rolls supply 66 ft each

Professional Grade Electrical Tape

This pack contains ten rolls of professional-grade electrical tape in gray. Each roll uses a plasticized PVC film carrier with a rubber resin adhesive. The tape is UL and CSA listed and designed for general-purpose electrical work and color-coding applications.

Thermals Noise and Power Draw

The tape is flame retardant and cold resistant for reliable performance in varying conditions. It is rated for use at no more than 600 volts and temperatures up to 176 degrees Fahrenheit. As a passive consumable, it generates no noise and draws no power during application or use.

66 Foot Length Per Roll

Every roll provides 66 feet of 7 mil thick tape on a 1.5 inch listed core. This length covers most standard wiring, splicing, and labeling tasks without frequent roll changes. Buyers needing multiple colors for complex phase identification should note this pack contains gray tape only.

Highlights

  • Professional-grade PVC film resists flame and cold
  • Rubber-resin adhesive bonds aggressively to wire and cable
  • UL and CSA listed for use up to 600 V and 176 °F
  • Eleven OSHA colours enable instant circuit identification
  • Ten individually wrapped rolls supply 66 ft each

Specifications

TypeElectrical Tape
ColorGray

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I apply the 7 mil thick PVC tape so it stays sealed on a 600V splice?

Stretch the tape as you wrap, overlapping each turn by half the width, and press firmly to activate the rubber resin adhesive; the 1.5 inch UL/CSA listed core keeps the roll from telescoping during the pull.

When will the gray tape need replacing on a motor lead that runs at 176°F?

The rubber resin adhesive and plasticized PVC carrier are rated to 176°F; inspect annually for hardening, cracking, or loss of tack, and replace at the first sign of degradation.

What fails first if I keep the tape continuously at 600V and 176°F?

The adhesive bond will degrade before the PVC backing, so loss of seal on the splice is the limiting factor under sustained maximum voltage and temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.