We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metallic SFP+ transceiver module with LC duplex port and side bail latch

AddOn

AddOn SFP-10G-SR-S-AO SFP transceiver 10G 850nm 300m LC MMF

SKU CH-QNJD-R1S3E MPN SFP-10G-SR-S-AO

A 10 Gbps SFP+ transceiver for multi-mode fibre links up to 300 metres at 850 nm with an LC connector

  • Device TypeTransceiver
  • Form FactorSFP+
  • Wavelength850nm
  • ProtocolsTCP/IP
  • FeatureCompatible OEM: Cisco® Compatible With OEM Part Number(s) SF
  • Weight0.0300

Type 10GBase-SR: 300m

  • 10 Gbps data rate for high-speed network links
  • 300 m reach over multi-mode fiber at 850 nm
  • LC duplex connector for standard patch-cord compatibility
  • Hot-swappable SFP+ form factor enables live module changes
  • TAA-compliant Cisco SFP-10G-SR-S compatible part for regulated deployments

Compatible 10G SFP+ for Cisco networks

This AddOn SFP-10G-SR-S-AO transceiver delivers 10 Gbps connectivity over multi-mode fibre at 850 nm. It is built for Cisco equipment that accepts the SFP-10G-SR-S part number and fits standard SFP+ cages. The module operates from 0 to 70 °C and weighs .0300 kg.

Hot-swappable LC module with DOM

The LC duplex connector and hot-pluggable design let you add or replace links without powering down the switch. Digital Optical Monitoring provides real-time signal diagnostics so administrators can verify link health on the fly. Multi-mode fibre support reaches 300 m for typical in-building runs.

Check cage, fibre and switch firmware

Verify that your switch or router lists SFP-10G-SR-S as a supported module and that the SFP+ cage accepts third-party optics. Confirm you have OM3 or OM4 multi-mode patch cords with LC ferrules for the 300 m reach. Ensure the host firmware is current to recognise the DOM data.

Highlights

  • 10 Gbps data rate for high-speed network links
  • 300 m reach over multi-mode fiber at 850 nm
  • LC duplex connector for standard patch-cord compatibility
  • Hot-swappable SFP+ form factor enables live module changes
  • TAA-compliant Cisco SFP-10G-SR-S compatible part for regulated deployments

Specifications

BrandAddOn
ModelSFP-10G-SR-S-AO
Part NumberSFP-10G-SR-S-AO
Device TypeTransceiver
Form FactorSFP+
Wavelength850nm
ProtocolsTCP/IP
FeatureCompatible OEM: Cisco®
Compatible With OEM Part Number(s) SFP-10G-SR-S
Transceiver Type: SR
Reach: 300m
Connector: LC
Form Type: SFP+
Wavelength: 850nm
Media: MMF
Speed Description: 10-Gigabit
Environment: 0 to 70C
Speed: 10GBase
DOM
Weight0.0300
Shipping weight4.99 kg
Package size114 × 44 × 3 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What is the operating temperature range for the AddOn SFP-10G-SR-S-AO transceiver?

The module is rated for 0 to 70 °C, so it will stay within spec inside a normally cooled rack or switch chassis.

How far can this 10G SFP+ SR module reliably transmit over OM3 multimode fibre?

It is specified for up to 300 metres at 850 nm on multimode fibre using LC connectors.

How much heat does the transceiver add when running continuously in a switch?

As a hot-swappable SFP+ SR transceiver it draws minimal power, adding very little heat to the chassis during all-day operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.