We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short passive copper SFP+ direct attach cable, 0.5 m

AddOn

AddOn PAN-SFP-PLUS-CU-0-5M-AO 10GBase-CU SFP+ Direct Attach Cable 0.5m

SKU CH-BXAY-QVV04 MPN PAN-SFP-PLUS-CU-0-5M-AO

A passive 10GBase-CU SFP+ direct-attach copper cable, 0.5 m long, compatible with Palo Alto Networks equipment

  • Compatible BrandPalo Alto Networks
  • Device TypeCable
  • Form FactorSFP+ to SFP+
  • FeatureActive or Passive: Passive Compatible OEM: Palo Alto Network
  • 5 m passive cable keeps rack links short and tidy
  • 10 Gbps copper link handles 10GBase traffic without extra transceivers
  • Palo Alto Networks compatible drop-in replaces PAN-SFP-PLUS-CU-0-5M directly
  • SFP+ to SFP+ form factor fits standard switch ports on both ends
  • TAA compliant build meets government procurement requirements

Direct-attach cable for Palo Alto Networks gear

This passive SFP+ to SFP+ twinax cable provides a 10GBase-CU link between compatible switches, routers or firewalls. It is built to the Palo Alto Networks PAN-SFP-PLUS-CU-0-5M specification and carries TAA compliance for regulated procurement.

Passive copper runs cool without external power

Because the assembly draws no active circuitry, latency stays minimal and heat output is negligible during continuous 10 Gb/s throughput. The half-metre reach suits adjacent rack units or intra-cabinet links where longer cables would add slack.

SFP+ ends lock securely into standard cages

Each connector latches firmly, resisting vibration in dense chassis while allowing tool-free removal when re-cabling. The 1.6 ft copper twin-axial construction keeps the bend radius manageable for tidy routing without stressing panel ports.

Highlights

  • 5 m passive cable keeps rack links short and tidy
  • 10 Gbps copper link handles 10GBase traffic without extra transceivers
  • Palo Alto Networks compatible drop-in replaces PAN-SFP-PLUS-CU-0-5M directly
  • SFP+ to SFP+ form factor fits standard switch ports on both ends
  • TAA compliant build meets government procurement requirements

Specifications

BrandAddOn
ModelPAN-SFP-PLUS-CU-0-5M
Part NumberPAN-SFP-PLUS-CU-0-5M-AO
Compatible BrandPalo Alto Networks
Device TypeCable
Form FactorSFP+ to SFP+
FeatureActive or Passive: Passive
Compatible OEM: Palo Alto Networks
Compatible With OEM Part Number(s): PAN-SFP-PLUS-CU-0-5M
Form Type: SFP+ to SFP+
Media: Copper
Length (m): 0.5
Length (ft): 1.6
Speed: 10GBase
Speed Description: 10-Gigabit
Transceiver Type: CU
Wire Gauge: 30 AWG
Shipping weight0.45 kg
Package size25 × 25 × 25 mm

Questions about this item

Does the passive 10GBase-CU direct attach cable draw any power or generate noticeable heat during continuous operation?

The cable is a passive twinax assembly with no active electronics, so it draws no power and produces no measurable heat while carrying 10 Gbps traffic.

What port type must the existing switch or firewall already provide for this SFP+ to SFP+ cable to work?

The equipment needs two SFP+ cages that accept 10GBase-CU copper direct attach cables; the 0.5 m length is designed for rack-adjacent connections.

Will the 0.5 m passive twinax link negotiate correctly with older 1 GbE SFP modules kept in the same chassis?

The cable operates at a fixed 10 Gbps rate and does not auto-negotiate down to 1 GbE; the opposing ports must also be configured for 10GBase-CU.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.