We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft HDMI male to DVI-D dual link adapter cable

AddOn

AddOn HDMI2DVID10F HDMI 1.3 to DVI-D Dual Link 24+1 pin 10 ft adapter cable

SKU CH-F9RM-THT4Z MPN HDMI2DVID10F

A 10 ft black cable converts HDMI 1.3 signals to DVI-D Dual Link 24+1 pin for displays up to 2560x1600 resolution

  • TypeDVI/HDMI
  • ColorBlack
  • Length10 ft.
  • Connector DetailHDMI Male HDMI 1.3 Digital Audio/Video HDMI Male Digital Aud
  • Cable Length10 ft.
  • Connects HDMI 1.3 sources to DVI-D Dual Link displays
  • 10 ft length suits typical desk-to-monitor distances
  • 24+1 pin connector supports full dual-link bandwidth
  • Maximum resolution 2560x1600 for high-detail workspaces
  • Black cable jacket blends with standard equipment aesthetics

HDMI 1.3 to DVI-D Dual Link adapter

This 10 ft adapter cable connects an HDMI 1.3 source to a DVI-D Dual Link display using a male-to-female configuration. The 24+1 pin connector supports a maximum resolution of 2560x1600 for clear digital video. It is suited for users linking legacy monitors or projectors to modern HDMI outputs without signal conversion hardware.

Passive design with no external power

The cable draws no separate power and adds negligible heat or noise to a system because it contains no active electronics. Signal integrity is maintained across the full 10 ft length through shielded conductors. Power draw is limited to the minimal current supplied by the HDMI source port itself.

Male-to-female layout for direct connection

The HDMI male plug inserts into the source device while the DVI-D female port accepts an existing DVI cable, freeing you from buying a separate male-to-male cable. The 10 ft reach allows flexible routing between equipment racks or across a desk. Ensure the display accepts a DVI-D Dual Link input before purchase.

Highlights

  • Connects HDMI 1.3 sources to DVI-D Dual Link displays
  • 10 ft length suits typical desk-to-monitor distances
  • 24+1 pin connector supports full dual-link bandwidth
  • Maximum resolution 2560x1600 for high-detail workspaces
  • Black cable jacket blends with standard equipment aesthetics

Specifications

BrandAddOn
TypeDVI/HDMI
ColorBlack
Length10 ft.
Connector DetailHDMI Male HDMI 1.3 Digital Audio/Video HDMI Male Digital Audio/Video
Cable Length10 ft.
Shipping weight0.45 kg
Package size330 × 279 × 51 mm

Questions about this item

How do I connect the HDMI male and DVI-D female ends without forcing the 24+1 pins?

Align the wide flat blade on the DVI-D plug with the matching slot, insert straight until the HDMI connector clicks, then tighten the captive thumbscrews by hand — no tools needed.

Will the gold-plated contacts on this 10 ft cable need cleaning or replacement over time?

The gold plating resists oxidation; a quick wipe with a dry lint-free cloth every few years keeps the 24+1 pins reliable — no scheduled replacement required.

At what point does the 10 ft length limit the 2560x1600 resolution during sustained use?

The 10 ft run stays within the HDMI 1.3/DVI-D Dual Link spec for 2560x1600, so signal degradation appears only beyond this length, not during normal operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.