We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular QSFP+ transceiver module with MPO port, matte metal finish

AddOn

AddOn Dell 407-BBOZ Compatible 40GBase-SR4 QSFP+ Transceiver switch module

SKU CH-YD6K-SX7HX

A hot-swappable 40GBase-SR4 QSFP+ transceiver for multi-mode fibre at 850 nm reaching 150 m over an MPO connector

  • Hot-swappable 40GBase-SR4 QSFP+ transceiver
  • Multi-mode 850 nm link up to 150 m
  • MPO connector for high-density patching
  • DOM support for real-time link monitoring
  • TAA compliant and lifetime warranty

Compatible Dell 407-BBOZ QSFP+ Transceiver

This AddOn module is a hot-swappable QSFP+ transceiver built for 40 Gigabit Ethernet links over multi-mode fibre. It operates at 850 nm wavelength with an MPO connector and supports digital optical monitoring. The unit measures 1.2" in height, 2.8" in width and 4.8" in depth, weighing approximately .40 lb. It is manufactured in the United States and carries a lifetime warranty.

Suited for 150 m multi-mode links.

Network engineers extending 40GBase-SR4 connections up to 150 metres on OM3 or OM4 multi-mode fibre will find this transceiver fits the requirement. Buyers who need longer reach, single-mode fibre compatibility or a different connector type should look at alternative modules because this unit is limited to multi-mode MPO interfaces at the specified distance.

Deciding spec: 150 m reach on multi-mode fibre

The 150 metre maximum link length on multi-mode fibre at 850 nm is the single specification that determines whether this transceiver matches the installation. If the planned run exceeds that distance or uses single-mode cabling, this module will not meet the requirement.

Highlights

  • Hot-swappable 40GBase-SR4 QSFP+ transceiver
  • Multi-mode 850 nm link up to 150 m
  • MPO connector for high-density patching
  • DOM support for real-time link monitoring
  • TAA compliant and lifetime warranty

Specifications

BrandAdd-On

Questions about this item

What maintenance does the MPO connector on this 40GBase-SR4 transceiver require?

The MPO connector should be inspected and cleaned with a lint-free wipe and approved solvent before each insertion to maintain low insertion loss on the multi-mode link.

What distance limit appears first when running this module at 40 Gb/s over OM3 fibre?

The 150 m reach specified for 850 nm operation is the first distance limit encountered under sustained 40 Gb/s traffic.

How much heat does the hot-swappable QSFP+ module add to a switch chassis during all-day operation?

The module draws power within the standard QSFP+ envelope, so its heat contribution is comparable to other 40GBase-SR4 optics and is managed by the host switch’s normal airflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.