We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A black SFP+ direct attach cable with connectors on both ends

AddOn

AddOn DAC-SFP-10GE-1M-AO SFP+ to SFP+ 10GBase-CU Direct Attach Cable

SKU CH-FJ9N-W2QHP

A 1 metre copper direct-attach cable linking two SFP+ ports at 10 Gigabit Ethernet speed for compatible Aruba switches

  • Compatible BrandPC
  • Device TypeSFP+
  • Network MediaCopper
  • Protocols10 Gigabit Ethernet
  • Safety CertificationNo
  • Ports1 x Male 10GBase-CU Network 1 x 10GBase-CU
  • 10 Gbps direct-attach link for low-latency server uplinks
  • TAA-compliant copper cable fits regulated procurement needs
  • Works with S2500 24- and 48-port Mobility Access Switches
  • Compatible with S3500 24- and 48-port switches plus 4X10G uplinks
  • Connects 7210 and 7240 Mobility Controllers at 10000 Mbps

10GBase-CU Direct Attach Cable

This AddOn DAC-SFP-10GE-1M-AO is a 10 Gigabit Ethernet copper cable with SFP+ connectors on both ends. It provides a direct link between compatible switches and controllers without separate transceivers. The cable weighs 0.2 pounds and carries a transfer rate of 10000 megabits per second. It is built for data networking applications in enterprise environments.

Replaces separate transceiver modules

Using this direct attach cable removes the need for two SFP+ transceivers and a patch cord in short reach links. The jump is worth it when connecting rack adjacent gear where a fixed length copper assembly simplifies cabling and reduces insertion loss points. It fits ports labelled 10GBase-CU on supported Aruba mobility access switches and controllers. The fixed design means no interchangeable optics for different distances.

One metre reach for rack local links

The assembly comfortably handles connections inside a single rack or between adjacent cabinets where the one metre length reaches. It runs out when the distance between SFP+ ports exceeds the cable length or when fibre is required for isolation or longer runs. Compatibility covers S2500 series with 24 or 48 ports, S3500 series with 24 or 48 ports plus 4x10G uplinks, and 7210 and 7240 mobility controllers.

Highlights

  • 10 Gbps direct-attach link for low-latency server uplinks
  • TAA-compliant copper cable fits regulated procurement needs
  • Works with S2500 24- and 48-port Mobility Access Switches
  • Compatible with S3500 24- and 48-port switches plus 4X10G uplinks
  • Connects 7210 and 7240 Mobility Controllers at 10000 Mbps

Specifications

BrandAddOn
ModelDAC-SFP-10GE-1M-AO
Part NumberDAC-SFP-10GE-1M-AO
Compatible BrandPC
Device TypeSFP+
Network MediaCopper
Protocols10 Gigabit Ethernet
Safety CertificationNo
Ports1 x Male 10GBase-CU Network 1 x 10GBase-CU
Transfer Rate10000 megabits_per_second
Weight0.2 pounds

Questions about this item

What is the length and connector type of the AddOn DAC-SFP-10GE-1M-AO cable?

The cable is 1 metre long and uses SFP+ male connectors on both ends for a direct 10GBase-CU copper link.

How do I install this DAC into an Aruba S2500 or S3500 switch, and what step is often missed?

Insert each SFP+ end firmly until the latch clicks; the step often missed is not pushing past the first detent, leaving the module unseated.

When should I plan to replace this direct attach cable in a 10 Gigabit Ethernet deployment?

Replace it if link errors appear, the latch tabs break, or the copper twinax shows kinks — otherwise it has no scheduled maintenance interval.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.