We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

AddOn

AddOn AJ716A-AO 8Gbps SFP+ transceiver 850nm MMF 300m LC

SKU CH-4MSW-WHZWY MPN AJ716A-AO

An 8 Gbps Fibre Channel SFP+ transceiver for 850 nm multi-mode fibre up to 300 m with LC connector

  • Compatible BrandHP®
  • Device TypeTransceiver
  • Form FactorSFP+
  • Wavelength850nm
  • Fiber CableMMF
  • ProtocolsTCP/IP
  • 8 Gbps Fibre Channel speed for high-bandwidth storage links
  • 300 m reach over 850 nm multi-mode fibre for short-range links
  • LC duplex connector for secure, low-loss patching
  • TAA compliant and MSA compliant for regulated procurements
  • 100 % functional test and HP AJ716A compatibility for drop-in deployment

HP® compatible 8 Gbps Fibre Channel SFP+

This AddOn AJ716A-AO transceiver delivers 8 Gbps Fibre Channel connectivity over multi-mode fibre at 850 nm wavelength. It uses an LC duplex connector and reaches 300 m on OM3 or OM4 cable. The module follows the SFP+ form factor and is built to MSA standards for broad switch compatibility. It is suited for data-centre and storage-area-network links within a rack or row.

TAA compliance and factory-loaded OEM configuration

The unit ships TAA compliant for government and regulated procurements. Each transceiver is factory programmed with HP® specific configuration data so it initialises identically to the original OEM module. AddOn tests every unit at 100 % functional coverage before dispatch, allowing mixed deployments with genuine HP® or other third-party transceivers without link negotiation issues.

Verify switch port type and fibre plant

Confirm the target switch port supports 8 Gbps Fibre Channel SFP+ optics and accepts the 850 nm multi-mode wavelength. Ensure the existing cabling is multi-mode fibre with LC duplex terminations and that the link budget fits the 300 m reach. Operating temperature range is 0 to 70 °C, so check the installation environment stays within those limits.

Highlights

  • 8 Gbps Fibre Channel speed for high-bandwidth storage links
  • 300 m reach over 850 nm multi-mode fibre for short-range links
  • LC duplex connector for secure, low-loss patching
  • TAA compliant and MSA compliant for regulated procurements
  • 100 % functional test and HP AJ716A compatibility for drop-in deployment

Specifications

BrandAddOn
Part NumberAJ716A-AO
Compatible BrandHP®
Device TypeTransceiver
Form FactorSFP+
Wavelength850nm
Fiber CableMMF
ProtocolsTCP/IP
Ports1 x LC Fiber Channel Network
Transfer Rate8 Gbps Fibre Channel
FeatureCompatible OEM: HP®
Compatible With OEM Part Number(s) AJ716A
Transceiver Type: SW Fibre Channel
Reach: 300m
Connector: LC
Form Type: SFP+
Wavelength: 850nm
Media: MMF
Speed Description: 8-Gigabit
Environment: 0 to 70C
Speed: 8GBase
Non-DOM
Shipping weight0.16 kg
Package size121 × 70 × 30 mm

Questions about this item

Does the LC connector on this transceiver require periodic cleaning or replacement?

The LC connector is a passive optical interface; it does not wear out but should be cleaned with a lint-free wipe and isopropyl alcohol if contamination causes signal loss.

What is the maximum link distance before signal degradation limits this 8 Gbps Fibre Channel SFP+?

The transceiver is rated for 300 metres over 850 nm multi-mode fibre; beyond that distance the optical budget is exceeded and errors increase.

How much heat does the module generate when running continuously at 8 Gbps in a 70 °C ambient?

The part is qualified for 0 to 70 °C operating temperature; power draw is low for an SFP+ form factor, so heat output remains minimal inside a ventilated chassis.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.