We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP transceiver with silver metal housing and black LC connector port

AddOn

AddOn AGM731F-AO 1000Base-SX SFP transceiver 850nm 550m LC

SKU CH-M9D3-SHY50 MPN AGM731F-AO

A 1-Gigabit SFP transceiver for multimode fibre at 850 nm reaching 550 m with an LC connector

  • Device TypeTransceiver
  • Wavelength850nm
  • ProtocolsTCP/IP
  • FeatureConnector: LC DOM: Non-DOM Form Type: SFP Media: MMF Reach:
  • Dimensions0.30" x 0.50" x 2.20" (H x W x D)
  • Weight0.15 lb
  • Gigabit fibre link up to 550 m over multimode
  • 850 nm wavelength suits short-range SX deployments
  • LC duplex connector fits standard SFP cages
  • Hot-pluggable SFP form factor enables tool-free swaps
  • Lightweight 0.15 lb module reduces chassis load

1000Base-SX SFP transceiver for multimode fibre

The AddOn AGM731F-AO is a small-form-factor transceiver built for 1-gigabit Ethernet over multimode fibre. It uses an 850 nm wavelength and an LC duplex connector to reach 550 metres. The module suits network administrators upgrading Netgear switches or routers that accept standard SFP ports.

Check SFP slot type and fibre patch cords before

Verify that the host device lists SFP rather than SFP+ or another form factor and that it supports 1000Base-SX optics. Ensure the patch panel and jumpers are multimode fibre with LC connectors matched to the 850 nm specification. Confirm the link budget covers the planned run length.

Steady 1-gigabit throughput across the 550-metre

The transceiver maintains line-rate 1000 Mbps over the full 550 metre multimode distance without throttling. Operating temperature range and non-DOM design keep performance consistent during continuous traffic loads. Low power draw reduces thermal load inside dense switch chassis.

Highlights

  • Gigabit fibre link up to 550 m over multimode
  • 850 nm wavelength suits short-range SX deployments
  • LC duplex connector fits standard SFP cages
  • Hot-pluggable SFP form factor enables tool-free swaps
  • Lightweight 0.15 lb module reduces chassis load

Specifications

BrandAddOn - Network Upgrades
ModelAGM731F-AO
Device TypeTransceiver
Wavelength850nm
ProtocolsTCP/IP
FeatureConnector: LC
DOM: Non-DOM
Form Type: SFP
Media: MMF
Reach: 550m
Speed: 1000Base
Speed (Mbs): 1000
Speed Description: 1-Gigabit
Transceiver Type: SX
Dimensions0.30" x 0.50" x 2.20" (H x W x D)
Weight0.15 lb
Shipping weight0.02 kg
Package size109 × 43 × 23 mm

Questions about this item

Does the AGM731F-AO come with any cables or patch leads, or do I need to buy LC duplex fibre separately?

The transceiver ships alone; you must supply your own LC duplex multimode patch cable to connect it.

My switch only lists 1000Base-SX — is this the correct version or do I need a different wavelength?

Yes — the module operates at 850 nm and is built for 1000Base-SX links over multimode fibre.

The spec says 550 m reach; will that distance hold on standard OM2 multimode in my building?

The 550 m figure is the rated maximum on OM2 multimode fibre; shorter runs on OM1 or OM3 will also work within that limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.