AddOn
AddOn ADD-SC-LC-3M6MMF Multi-Mode Fiber Duplex LC/SC Patch Cable
A 9.84 ft duplex multi-mode fiber patch cable with LC and SC connectors for network links
- 3-meter length reaches between rack-mounted patch panels and switches
- Duplex LC-to-SC connectors link transmit and receive fibers in one cable
- Multi-mode fiber supports high-bandwidth Ethernet and multimedia traffic
- Injection-molded push-pull locking resists pull strain during installation
- Orange jacket identifies multi-mode cable at a glance
3-metre multi-mode duplex patch cable
This AddOn multi-mode fibre patch cable runs 9.84 ft and carries duplex LC male connectors on one end and duplex SC male connectors on the other. The orange jacket identifies the multi-mode rating for short-reach links. It is built for Ethernet, multimedia and general communication circuits between patch panels, hubs, switches, media converters and routers.
Check connector gender and polish type
Verify that the equipment ports accept LC and SC male ferrules and confirm the required polish finish for your transceivers. Ensure the link budget matches multi-mode specifications and that the 9.84 ft length reaches between the two devices without excess slack.
Suits installers linking LC and SC gear
Network technicians who need a ready-made LC-to-SC multi-mode jumper for rack-to-rack or switch-to-panel runs will find the cable convenient. Buyers requiring single-mode fibre, different connector combinations or a longer reach should look at other cable types.
Highlights
- 3-meter length reaches between rack-mounted patch panels and switches
- Duplex LC-to-SC connectors link transmit and receive fibers in one cable
- Multi-mode fiber supports high-bandwidth Ethernet and multimedia traffic
- Injection-molded push-pull locking resists pull strain during installation
- Orange jacket identifies multi-mode cable at a glance
Specifications
| Brand | AddOn - Network Upgrades |
|---|---|
| Model | ADD-SC-LC-3M6MMF |
Questions about this item
What connectors come on the 9.84 ft AddOn multi-mode fiber patch cable and do I need any extra adapters?
The cable has two LC male connectors on one end and two SC male connectors on the other; no separate adapters are required for standard LC or SC ports.
When should I choose this multi-mode LC/SC duplex patch cable over a single-mode or different-connector version?
Choose this cable when linking network devices that have LC and SC interfaces and require multi-mode fiber for shorter-distance, high-bandwidth links such as patch panels, switches, or media converters.
What does the 9.84 ft length mean for signal loss in a typical gigabit Ethernet run?
At 9.84 ft the insertion loss is negligible for multi-mode gigabit Ethernet, so the cable will deliver full rated bandwidth between connected switches, routers, or patch panels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



