We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black network injector with two RJ-45 ports and AC power cable

AddOn

AddOn ADD-POEINJCT60W 60W PoE++ Injector 1Gbps RJ-45 wireless accessory

SKU CH-G7B7-HTZSA MPN ADD-POEINJCT60W

Single-port PoE++ injector delivers up to 60 W over RJ-45 copper at 1 Gbps for 100 m reach

  • TypePoE Injector
  • SpecificationsCompatible OEM: Industry Standard Media Type: Copper Data Ra
  • Delivers up to 60 W to PoE++ devices
  • Powers compatible access points and IP cameras without a PoE switch
  • Gigabit copper link reaches 100 m over Cat5e or better
  • 120 V AC input with 54–57 V DC output for IEEE 802.3bt compliance
  • Single RJ-45 port adds PoE to existing network runs

60W PoE++ Injector

The AddOn ADD-POEINJCT60W is a single-port Power-over-Ethernet injector that delivers up to 60 watts over copper cabling. It combines data and power on one RJ-45 link so compatible devices such as wireless access points or IP cameras can operate without a PoE-enabled switch.

Installers needing PoE++ on a single run

This unit suits installers who need to add PoE++ capability to an existing non-PoE network link for one device. It does not suit deployments that require multiple powered ports, managed features such as VLANs or port monitoring, or fibre uplink connectivity.

60W over 100 metres at 1Gbps

The injector provides 60W of PoE++ power at 54-57Vdc across a 100-metre copper reach while passing 10/100/1000Base-T traffic. Headroom ends at the single-port limit and the 60W ceiling; devices demanding more power or additional ports need a PoE switch instead.

Highlights

  • Delivers up to 60 W to PoE++ devices
  • Powers compatible access points and IP cameras without a PoE switch
  • Gigabit copper link reaches 100 m over Cat5e or better
  • 120 V AC input with 54–57 V DC output for IEEE 802.3bt compliance
  • Single RJ-45 port adds PoE to existing network runs

Specifications

BrandAddOn - Network Upgrades
ModelADD-POEINJCT60W
TypePoE Injector
SpecificationsCompatible OEM: Industry Standard
Media Type: Copper
Data Rate: 1Gbs
Power Supply: 120V AC Power Cable
Media Conversion Type: Copper to Copper
Reach: 100m
Type: POE Injector
POE: POE++
Unmanaged
IEEE Standard 802.3bt
Additional Information Multi-Rate
Connector1 Number of Ports: 1
Connector2 Number of Ports: 1
Connector Types: RJ-45 & RJ-45
POE Watts: 60W
Shipping weight0.59 kg
Package size178 × 76 × 51 mm

Questions about this item

What AC voltage must the building supply for the injector's 120V power cable?

The injector ships with a 120V AC power cable, so the site must provide a standard 120 V mains outlet.

Will a legacy 10/100 Mbps switch port limit the 1 Gbps data rate on the RJ-45 link?

Yes, connecting to a 10/100 port caps the link at 100 Mbps; a 10/100/1000 port is needed for the full 1 Gbps rate.

How can I confirm the injector is delivering up to 60 W to a PoE++ device after installation?

Check the powered device's status LEDs or management interface; they will show the negotiated power class and confirm up to 60 W delivery.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.