We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

AddOn

AddOn 1000Base-BX SFP Transceiver 1310nmTx/1490nmRx 10km LC DOM

SKU CH-RBFH-3RNAC

Single-fibre 1000Base-BX SFP transceiver using 1310 nm Tx and 1490 nm Rx wavelengths for 10 km reach over LC single-mode fibre with digital optical monitoring

  • TAA-compliant for regulated deployments
  • 10 km reach over single-mode fibre
  • 1310 nm Tx and 1490 nm Rx wavelengths
  • 1000 Mbps SFP with LC DOM monitoring

AddOn 1000Base-BX SFP Transceiver

The AddOn 1000Base-BX SFP transceiver provides single-mode fibre connectivity at 1000 Mbps over distances up to 10 km. It uses a 1310 nm transmit wavelength paired with a 1490 nm receive wavelength and an LC duplex connector. The module is TAA compliant and coded for Alcatel-Lucent Nokia equipment compatibility.

Thermals noise and power draw

The small form-factor pluggable design draws minimal power and produces negligible acoustic output inside a switch or router chassis. Operating temperature follows the standard SFP range for network equipment. Digital optical monitoring allows real-time tracking of temperature, voltage and optical power levels.

Highlights

  • TAA-compliant for regulated deployments
  • 10 km reach over single-mode fibre
  • 1310 nm Tx and 1490 nm Rx wavelengths
  • 1000 Mbps SFP with LC DOM monitoring

Specifications

BrandAddOn

Questions about this item

How do I install the 1000Base-BX SFP transceiver with LC connectors and what step is often missed?

Insert the transceiver into the SFP port until it clicks, then connect the LC duplex fibre with the 1310 nm Tx linked to the remote 1490 nm Rx. The step often missed is matching the Tx and Rx wavelengths at both ends.

What maintenance will the 10km single-mode transceiver need over time?

Inspect and clean the LC ferrules with a fibre scope and lint-free wipes whenever links are reconnected. Use the DOM interface to monitor optical power and temperature; replace the module if receive power drops toward the sensitivity limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.