Adaptec
Adaptec AHA-2940I PCI SCSI RAID controller
PCI SCSI RAID controller for connecting storage to servers, listed April 28, 2026
- PCI SCSI RAID controller for server storage expansion
- Adaptec AHA-2940I model designed for PCI bus compatibility
- New condition ensures full manufacturer specification performance
- First listed by manufacturer April 28 2026
- Dedicated RAID card category for enterprise server components
Adaptec AHA-2940I PCI SCSI Controller
The Adaptec AHA-2940I is a PCI SCSI controller card designed to add SCSI connectivity to servers or workstations. It suits administrators maintaining legacy storage arrays or tape libraries that still rely on the parallel SCSI bus. The card installs into a standard PCI slot and carries the Adaptec brand.
Compatibility and Alternatives
This card fits systems with an available PCI slot and a need for traditional SCSI device support. Builders requiring newer serial-attached interfaces or higher throughput should consider other options. Users without PCI slots or SCSI peripherals will not be able to use this controller.
2940 Model Identifier
The model number 2940 identifies this specific Adaptec controller within the product line. It distinguishes the card from other Adaptec SCSI or RAID adapters that use different interfaces or feature sets. Verify the 2940 designation against your hardware list before ordering.
Highlights
- PCI SCSI RAID controller for server storage expansion
- Adaptec AHA-2940I model designed for PCI bus compatibility
- New condition ensures full manufacturer specification performance
- First listed by manufacturer April 28 2026
- Dedicated RAID card category for enterprise server components
Specifications
No published specifications for this item yet.
Questions about this item
Does the 2940 controller use a standard PCI interface, and what throughput does that bus cap at?
The card uses a PCI interface; practical throughput is limited by the bus clock and width of the host system.
What physical slot and bracket does the 2940 need to mount in a server chassis?
It requires a 5 V PCI expansion slot and a standard full-height bracket for installation.
How is the 2940 installed, and which step is most often missed?
Insert the card firmly into the PCI slot, secure the bracket screw, attach the SCSI cable to the onboard connector, then run the BIOS configuration utility to initialise the array before loading the OS.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
FUJIFILM 25302884 White Thermal Printable 4.7GB 8X DVD-R 100 Packs
- DVD-R
- 4.7GB



