We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal handheld dynamic microphone with 13 ft cable and 6.35 mm jack

Adamantite H1 Dynamic Microphone Black 6.35 mm Jack 13 ft Cable 120 dB SNR

SKU CH-42DC-ZC7VM

A cardioid dynamic microphone with a 13 ft cable, 6.35 mm jack and 120 dB signal-to-noise ratio for clear vocals

  • ColorBlack
  • Connector6.35 mm Jack
  • Microphone Signal to Noise Ratio(SNR)120 decibels
  • Cardioid pickup isolates vocals from background noise
  • All-metal body with built-in pop shield reduces handling sounds
  • Magnetic on/off switch works without batteries
  • 13 ft XLR cable connects to mixers and PA systems
  • 120 dB signal-to-noise ratio delivers clean audio

Handheld Dynamic Microphone

The Adamantite H1 is a cardioid dynamic microphone built for vocals and speech. Its all-metal body houses a built-in pop shield that reduces plosives during close-up use. The microphone draws no power and connects through a 6.35 mm jack for direct analogue input. It suits singers, speakers and streamers who need a simple wired solution.

Passive Operation and Cable Length

Because the capsule is passive, the unit adds no self-noise and requires no batteries or phantom power. The supplied 13-foot XLR-to-6.35 mm cable keeps the signal path short enough for clean 120 dB SNR performance. An external slide switch mutes the microphone instantly without unplugging. Heat and fan noise are non-existent with this design.

Included Cable and Mounting

The box provides a single 13 ft XLR male to 6.35 mm male cable and the microphone itself. No mic clip, stand or software is bundled, so you must supply a stand with a compatible thread. The magnetic on/off switch replaces a traditional toggle for quicker muting. Compatibility covers any mixer, amplifier or karaoke machine with a 6.35 mm input.

Highlights

  • Cardioid pickup isolates vocals from background noise
  • All-metal body with built-in pop shield reduces handling sounds
  • Magnetic on/off switch works without batteries
  • 13 ft XLR cable connects to mixers and PA systems
  • 120 dB signal-to-noise ratio delivers clean audio

Specifications

BrandAdamantite
ModelH1
Part NumberH1
ColorBlack
Connector6.35 mm Jack
Microphone Signal to Noise Ratio(SNR)120 decibels

Questions about this item

How do I install the Adamantite H1 and what step do people often miss?

Connect the 6.35 mm jack to your mixer or amplifier, then push the magnetic switch up to power on; the step often missed is ensuring the switch is fully engaged before speaking.

What maintenance or replacement will the Adamantite H1 need later?

The all-metal body and built-in pop shield require no routine part changes; only the 13 ft XLR cable may need replacement if the connector or shielding becomes damaged.

What limit appears first during sustained use of the Adamantite H1?

The 120 dB signal-to-noise ratio defines the noise floor; under continuous loud vocal input the microphone will reach its maximum clean output before any thermal or power limit is hit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.