We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular active studio monitor with 7-inch woofer and 1.9-inch ribbon tweeter

Adam Audio

Adam Audio T7V studio monitor

SKU CH-W7EB-QQTCM

Active nearfield monitor with 1.9" U-ART ribbon tweeter, 7" woofer, 39 Hz – 25 kHz response and 110 dB peak SPL

  • U-ART tweeter and HPS waveguide deliver detailed highs up to 25 kHz
  • 50 W woofer plus 20 W tweeter produce 110 dB max SPL
  • 7" polypropylene driver extends bass down to 39 Hz
  • Rear-firing port and beveled cabinet allow flexible placement near walls
  • DSP high- and low-shelf filters adapt response to difficult rooms

Active nearfield monitor for critical listening

The Adam Audio T7V is a single active nearfield studio monitor designed for recording, producing and mixing. Its U-ART 1.9" accelerated ribbon tweeter and HPS waveguide deliver detailed high-frequency reproduction with consistent dispersion. A 7" polypropylene woofer and rear-firing bass-reflex port extend low-frequency output in a bevelled cabinet that fits tight spaces.

Upgrade from entry-level monitors

This model replaces basic multimedia speakers or smaller monitors that lack controlled directivity and low-frequency extension. The bi-amplified design provides 50 W to the woofer and 20 W to the tweeter, reaching a maximum SPL of 110 dB. Rear-panel DSP-based high-shelf and low-shelf filters at -2, 0 and +2 dB adapt the response to acoustically difficult rooms without external processing.

Headroom for mid-sized control rooms

The frequency response spans 39 Hz to 25 kHz, giving sufficient low-end coverage for most music production tasks while the tweeter's 2.5 times larger effective diaphragm area reduces fatigue during long sessions. XLR and RCA inputs with adjustable input sensitivity and gain connect directly to audio interfaces or consumer sources. For full-range monitoring below 39 Hz the matching T10S subwoofer extends the system.

Highlights

  • U-ART tweeter and HPS waveguide deliver detailed highs up to 25 kHz
  • 50 W woofer plus 20 W tweeter produce 110 dB max SPL
  • 7" polypropylene driver extends bass down to 39 Hz
  • Rear-firing port and beveled cabinet allow flexible placement near walls
  • DSP high- and low-shelf filters adapt response to difficult rooms

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the rear-firing bass reflex port need behind the T7V?

The beveled cabinet is designed for placement anywhere, even with limited space, so the rear-firing bass reflex port works close to walls.

How do I set the input sensitivity and DSP shelves on the T7V rear panel?

Use the rear-panel controls to select XLR or RCA input sensitivity, gain, and high-shelf or low-shelf settings at -2, 0, or +2 dB.

When should I replace the U-ART 1.9" accelerated ribbon tweeter on the T7V?

The U-ART tweeter's folded diaphragm prevents breakup and reduces fatigue, allowing longer operation without a scheduled replacement interval.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.