We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular active subwoofer with down-firing 10 inch woofer and rear panel controls

Adam Audio

Adam Audio T10S 10" 130W active studio subwoofer

SKU CH-HX9S-RA3MR

Compact 10" active subwoofer extends bass to 28 Hz with 130 W power and 104 dB peak SPL, adjustable crossover at 80 or 120 Hz, phase switch and footswitch bypass for T5V/T7V monitors

  • Extends low-end response down to 28 Hz
  • 130 W amplifier drives 10" down-firing woofer for 104 dB peak SPL
  • Adjustable crossover at 80 Hz or 120 Hz plus 0/180° phase switch
  • Footswitch bypass lets you A/B your mix with sub on or off
  • Compact enclosure fits small studios and pairs with T5V or T7V monitors

Compact active subwoofer for nearfield monitoring

The Adam Audio T10S is a compact, active 10" subwoofer designed to extend the low-frequency response of nearfield studio monitors. It is engineered specifically to complement T5V and T7V speakers for accurate bass reproduction. A 130W amplifier powers the down-firing paper cone woofer.

Sustained output and compression-free headroom

The subwoofer delivers linear bass reproduction down to 28 Hz with a maximum peak SPL of 104 dB. The amplifier provides powerful, compression-free sound reproduction even at very high sound levels. Adjustable crossover settings at 80 Hz, 120 Hz and bypass allow precise calibration for sustained monitoring sessions.

Rear-panel controls for room integration

A level knob, 0/180° phase switch and three crossover selections enable flexible placement in any studio environment. The downward-facing woofer design allows more positioning options without affecting thermal performance. A 1/4" remote bypass input lets you toggle the subwoofer with an optional footswitch.

Highlights

  • Extends low-end response down to 28 Hz
  • 130 W amplifier drives 10" down-firing woofer for 104 dB peak SPL
  • Adjustable crossover at 80 Hz or 120 Hz plus 0/180° phase switch
  • Footswitch bypass lets you A/B your mix with sub on or off
  • Compact enclosure fits small studios and pairs with T5V or T7V monitors

Specifications

No published specifications for this item yet.

Questions about this item

How much heat or fan noise does the 130W amplifier produce during long sessions?

The 130W Class D amplifier runs the 10" down-firing woofer without a fan, so the only heat is normal warm air from the rear vents and there is no audible mechanical noise.

Which cables and monitors do I need before the T10S will play?

You need a pair of line-level cables from your audio interface or monitor controller to the subwoofer inputs, then two more cables from the subwoofer outputs to your T5V or T7V monitors; a standard IEC power cord is included.

Will the 80 Hz and 120 Hz crossover points integrate cleanly with older nearfield monitors that roll off higher?

The rear panel offers bypass, 80 Hz and 120 Hz crossover settings plus a 0/180° phase switch, letting you align the 28-120 Hz response to monitors that start rolling off above 80 Hz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.