We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small rectangular PoE splitters, matte black plastic, RJ45 ports each end, 10 cm long

AdaLov 48V-24V POE Splitter 12V 1A Gigabit 2 Pack

SKU CH-GVCK-JWGQC

Converts 48 V PoE to 12 V 1 A for non-PoE cameras or APs, delivers gigabit data up to 100 m, IEEE 802.3af/at compliant, two weatherproof units included

  • PortsRJ45
  • Connection TypeRJ45
  • Kit Type2
  • CablingRJ45, 2PC PoE Splitters
  • Power Supplyno_plug
  • System RequirementCameras
  • Converts 48 V PoE to safe 12 V 1 A output
  • Delivers gigabit data and power together over one cable
  • Works with 38–56 V PoE switches up to 100 m
  • Built-in overvoltage protection for reliable device operation
  • Two splitters plus weatherproof pieces included for indoor and outdoor use

Gigabit PoE Splitter 12V 2 Pack

This two-pack of Gigabit PoE splitters converts 48 V Power over Ethernet to a regulated 12 V 1 A DC output. Each unit complies with IEEE 802.3af/at and delivers simultaneous 10/100/1000 Mbps data and power over a single RJ45 cable. The adapters are built for IP cameras, wireless bridges and access points that lack native PoE support.

Plug-and-Play Integration for Non-PoE Devices

Connect the splitter between a compliant PoE switch or injector and the target device; no extra power supply or configuration is required. The 10 cm x 3 cm x 3 cm housing fits inline on standard Cat5e or Cat6 runs up to 100 m. Two weatherproof caps are included to seal outdoor connections against moisture and dust.

Passive Cooling with Built-In Protection

The compact enclosure dissipates heat passively, so operation is silent in typical surveillance or networking deployments. Over-voltage protection guards connected equipment when input ranges between 38 V and 56 V. Power draw at the output is limited to 12 W, matching the 12 V 1 A rating without active fan noise.

Highlights

  • Converts 48 V PoE to safe 12 V 1 A output
  • Delivers gigabit data and power together over one cable
  • Works with 38–56 V PoE switches up to 100 m
  • Built-in overvoltage protection for reliable device operation
  • Two splitters plus weatherproof pieces included for indoor and outdoor use

Specifications

BrandAdaLov
Model48V-24V POE Splitter
Part Number48V-24V POE Splitter
PortsRJ45
Connection TypeRJ45
Kit Type2
CablingRJ45, 2PC PoE Splitters
Power Supplyno_plug
System RequirementCameras
FeaturesConvert 48V PoE to DC 12V/1A output, for power supply and for netework. Non-PoE devices with ethernet port via network cable can enjoy the same convenience of POE power as POE devices.Support fast gigabit transmission, compatible with 10/100/1000Mbps rates., OUTPUT: DC24V 1A, 1000Mbps, power and data are outputed simultaneously by gigabit ethernet PoE splitter through network cables., RJ45, 1, Cameras, no_plug, false, 1 year
Dimensions10 cm x 3 cm x 3 cm
Package Contents1 x 2PC PoE Splitters

Questions about this item

What is the maximum cable length before signal loss limits performance?

The splitter supports up to 100 m (328 ft) of cable for stable power and gigabit data transmission.

Does the unit run hot or draw extra power when used continuously?

It converts 48 V PoE to 12 V at 1 A with built-in overvoltage protection and no external power supply, so heat and draw stay low during all-day operation.

What PoE standard must the switch or injector already support for this splitter to work?

The connected PoE switch or PSE injector must comply with IEEE 802.3af/at and supply 38–56 V DC for the splitter to function.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.