We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White wall-mount occupancy sensor with single button and photocell

Acuity Sensor Switch

Acuity Sensor Switch LWS WH Wall Mount Occupancy Sensor Contactor 120-277V 800W 1200 sq ft White

SKU CH-CBWD-Z2A07

Wall-mount occupancy sensor with photocell controls fluorescent, incandescent or LED loads up to 800 W at 120–277 V AC across 1,200 sq ft

  • Detects motion automatically with passive infrared technology
  • Controls lighting loads up to 800 watts at 120 volts
  • Operates on 120 to 277 volt AC power supply
  • Covers areas up to 1200 square feet
  • Works with fluorescent, incandescent and LED fixtures

Wall-Mount Occupancy Sensor

The Acuity Sensor Switch LWS WH is a hard-wired passive infrared occupancy sensor designed for commercial lighting control. It mounts directly on a wall and manages fluorescent, incandescent or LED loads across a 120 to 277V AC supply without requiring a neutral connection.

Sustained Coverage Performance

Passive infrared sensing maintains detection across 1 200 sq ft as long as motion continues within the zone. The sensor holds the connected load on during continuous occupancy and releases it only after the space becomes vacant, avoiding the false retriggers that can occur with brief burst detection.

Hard-Wired Build and Daily Use

A single-button housing in white finishes the unit for standard wall-box installation. Line-voltage switching handles up to 800W at 120V AC for fluorescent or incandescent circuits, and the hard-wired communication method means no wireless pairing or network configuration is needed during commissioning.

Highlights

  • Detects motion automatically with passive infrared technology
  • Controls lighting loads up to 800 watts at 120 volts
  • Operates on 120 to 277 volt AC power supply
  • Covers areas up to 1200 square feet
  • Works with fluorescent, incandescent and LED fixtures

Specifications

BrandSENSORSWITCH

Questions about this item

How much heat or power draw should I expect from the 800W load rating when the sensor runs continuously?

The sensor itself draws minimal power; the 800W rating is the maximum connected lighting load at 120V AC, not the unit's own consumption.

Does the hard-wired installation require a neutral wire in the switch box?

No, the specifications state that a neutral wire is not required for this model.

Will the passive infrared sensor reliably detect motion alongside older fluorescent ballasts in the same circuit?

Yes, the sensor is rated for fluorescent, incandescent and LED loads up to 800W at 120V AC, so it works with legacy ballasts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.