Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936626BTC
In stock
Acuity Lithonia
Acuity Lithonia JHBL 24000lm 185W 5000K 70CRI IP65 light kit
Delivers 24,000 lumens at 5,000 K with IP65 protection for mounting heights up to 60 ft
- High output with 26,515 lumens for large areas
- Energy-efficient 185.0 W LED technology reduces power use
- IP65 rating protects against dust and water jets
- Operates from -40 to 149 °F in harsh environments
- DLC listed and CSA certified for safety compliance
Industrial LED High Bay Kit
The Acuity Lithonia JHBL kit delivers 24000 lumens at 185.0 watts using LED technology. A 5000K colour temperature and 70.0 CRI suit warehouses, factories and large retail spaces needing bright, cool-white illumination.
IP65 Sealed Linear Housing
The linear high-bay fixture carries an IP65 rating and operates from -40 to 149 degrees F. Wide light distribution covers broad floor areas from mounting heights up to 60 ft. CSA certification confirms compliance with US and Canadian safety standards.
Verify Voltage And DLC Eligibility
Confirm the site supply falls within the 120 to 277 volt range before ordering. Check local utility rebate programmes for DesignLights Consortium qualification. This unit is not intended for residential ceiling heights or decorative pendant mounting.
Highlights
- High output with 26,515 lumens for large areas
- Energy-efficient 185.0 W LED technology reduces power use
- IP65 rating protects against dust and water jets
- Operates from -40 to 149 °F in harsh environments
- DLC listed and CSA certified for safety compliance
Specifications
| Brand | LITHONIA LIGHTING |
|---|
Questions about this item
What voltage range does the 120 to 277 V input actually support in practice?
The fixture operates on any supply between 120 V and 277 V, so it works on standard 120 V circuits and on 277 V commercial feeds without rewiring.
What mounting hardware or clearance does the linear high-bay fixture need to install at heights up to 60 ft?
The unit is a linear high-bay designed for chain, cable or surface mounting; allow enough vertical clearance for the 185 W housing and its IP65-rated enclosure when hanging at the suggested 60 ft maximum height.
How is the DLC-listed LED kit wired on site, and which connection step do installers most often miss?
Connect the incoming 120-277 V supply to the driver leads inside the wiring compartment, then secure the ground; the step most often missed is torquing the IP65 cable-gland nuts to maintain the wet-location seal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
