We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular subwoofer cabinet with down-firing driver and slotted port, black ash finish, vibration feet

Acoustic Audio

Acoustic Audio PSW-12 500W 12" Powered Subwoofer Black

SKU CH-S3C8-GQG12

A 12-inch down-firing powered subwoofer delivering 500 watts peak power with a 24 to 250 Hz frequency response for deep home-theatre bass

  • TypeSubwoofer
  • Driver Units250 W
  • Frequency Response24 Hz to 250 Hz
  • ColorBlack
  • Features250 Watts Nominal RMS to 500 Watts Maximum/Built-in Digital
  • Deep bass down to 24 Hz for movie impact
  • 500 W peak amplifier drives the 12" driver with authority
  • Auto on/off signal sensing saves power without effort
  • Phase 0–180° and crossover 40–140 Hz dial in blend
  • CARB-compliant MDF cabinet with internal bracing reduces resonance

Subwoofer for home theatre systems

The Acoustic Audio PSW-12 is a powered subwoofer with a 12 inch down-firing driver and a built-in high-efficiency amplifier rated at 500 watts peak. It covers a frequency response of 24 to 250 Hz at 98 dB sensitivity and uses a black ash finished MDF cabinet with internal bracing. Standard RCA and high-level raw wire inputs allow connection to a wide range of receivers and stereo amplifiers.

Suited for buyers adding bass to a surround system

This subwoofer fits listeners who want deep low-frequency reinforcement from a single cabinet with auto on/off sensing, phase control and a variable crossover between 40 and 140 Hz. It is not for systems that require a dedicated LFE channel input, nor for setups that lack either an RCA sub-out or speaker-level outputs on the source component.

Deciding spec: 500 watts peak power

The combination of peak amplifier power and driver size determines whether the unit can deliver the output level a room needs. Buyers should match the 500 watt peak figure and 24 Hz low-end extension against their receiver’s subwoofer output capability and the listening space volume.

Highlights

  • Deep bass down to 24 Hz for movie impact
  • 500 W peak amplifier drives the 12" driver with authority
  • Auto on/off signal sensing saves power without effort
  • Phase 0–180° and crossover 40–140 Hz dial in blend
  • CARB-compliant MDF cabinet with internal bracing reduces resonance

Specifications

BrandAcoustic Audio
ModelPSW-12
TypeSubwoofer
Driver Units250 W
Frequency Response24 Hz to 250 Hz
ColorBlack
Features250 Watts Nominal RMS to 500 Watts Maximum/Built-in Digital Drive High Efficiency Amplifier/12 Inch Down-Firing Long Throw Driver/Downward Radiating Slot Port/Black Ash Finish

Questions about this item

How much floor space does the 13.8" high cabinet with 13.4" width and 14.6" depth need?

The standing subwoofer measures 13.8 inches tall by 13.4 inches wide by 14.6 inches deep, so allow at least that footprint plus a few centimetres of rear clearance for the downward radiating slot port to breathe.

Which cable do I plug into the receiver's subwoofer output, and where does it go on the sub?

Use a standard RCA cable from the receiver's dedicated Sub Out into either of the dual low-level RCA inputs on the back panel; the auto on/off circuit will wake the amplifier when it detects a signal.

Will the 12-inch PVA-treated cone or the built-in 250 W nominal amplifier need periodic service?

The driver and integrated amplifier are sealed inside the CARB-compliant MDF cabinet with internal bracing and have no user-serviceable parts; normal dusting of the black ash finish is the only upkeep required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.