We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular in-wall center speaker with dual 6.5" woven cones and soft dome tweeter behind removable paintable grill

Acoustic Audio

Acoustic Audio HD-6c 6.5" In-Wall Center Speaker

SKU CH-F528-CZ22Z

Flush-mount centre channel with dual 6.5″ woven-fibre woofers and a 12 mm soft-dome tweeter delivers 33 Hz–22 kHz response at 98 dB sensitivity

  • TypeCenter Channel Speaker
  • Driver Units6.5"
  • Frequency Response33 Hz
  • Nominal Impedance8 Ohms
  • Sensitivity98 dB
  • ColorWhite
  • Clear dialogue from a 12 mm soft dome tweeter
  • Deep bass down to 33 Hz with dual 6.5" Kevlar woofers
  • Loud, clean output at 98 dB sensitivity and 175 W RMS
  • Installs in minutes with the tool-free Pressure Lock mounting system
  • Paintable white grille and ABS frame blend into any décor

Center Channel for Home Theater

The Acoustic Audio HD-6c is a flush-mount center channel speaker designed for home theater surround sound or whole-house audio systems. Its traditional passive design connects directly to any home audio receiver or amplifier using raw speaker wire outputs. The speaker integrates with new and existing setups without requiring proprietary electronics. Buyers who need an active soundbar with built-in streaming or HDMI connectivity will not find those features here.

Fits Standard Wall Cavities

The rectangular cutout measures 19.21" x 7.4" with a 3.03" mounting depth, while the overall grille dimensions are 20.47" x 8.66". A Pressure Lock Mounting System clamps the ABS housing to drywall without separate hardware, and spring-loaded terminals accept bare wire. The removable white grill can be painted to match the surrounding décor. Installers without access to CL3-rated in-wall speaker wire must source it separately to meet code requirements.

High Sensitivity 8-Ohm Load

Dual 6.5" woven fiber woofers with butyl rubber surrounds and a 12mm soft dome tweeter deliver a frequency response of 33 Hz to 22 kHz at 98 dB sensitivity. The 8-ohm nominal impedance presents an easy load for amplifiers rated between 10 and 350 watts per channel, with 175 watts RMS and 350 watts peak power handling. The passive crossover and sealed enclosure produce no fan noise or active heat, leaving thermal management entirely to the driving amplifier.

Highlights

  • Clear dialogue from a 12 mm soft dome tweeter
  • Deep bass down to 33 Hz with dual 6.5" Kevlar woofers
  • Loud, clean output at 98 dB sensitivity and 175 W RMS
  • Installs in minutes with the tool-free Pressure Lock mounting system
  • Paintable white grille and ABS frame blend into any décor

Specifications

BrandAcoustic Audio
ModelHD-6c
TypeCenter Channel Speaker
Driver Units6.5"
Frequency Response33 Hz
Nominal Impedance8 Ohms
Sensitivity98 dB
ColorWhite
FeaturesAcoustic Audio High Definition Series HD-6c In-Wall or Ceiling Center Channel Speaker|350 Watts Peak Power Handling / 175 Watts RMS Power Handling|(2) 6.5" Authentic Kevlar Cone Woofers with Butyl Rubber Surrounds and Soft Dome Tweeter|3.25" Mounting Depth – Mounts Flush for Nearly Invisible Installation|Acoustic Audio Lifetime Warranty

Questions about this item

What is the lowest frequency the Acoustic Audio HD-6c can reproduce before output drops off?

The speaker reaches down to 33 Hz, giving solid low-end presence for dialogue and effects in a center-channel role.

How much heat or noise does the HD-6c generate during a full-day movie marathon?

As a passive design it produces no fan noise or active heat; only the amplifier warms up, and the 98 dB sensitivity keeps amp current modest even at high volumes.

Which amplifier specs must I already have to drive this in-wall center speaker safely?

You need a home audio receiver or amplifier with raw speaker-wire outputs rated between 10 and 350 watts per channel into 8 ohms, plus CL3-rated in-wall speaker cable for the run.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.