We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Acoustic Audio

Acoustic Audio CS-IC83 In-Ceiling 8" 7-Speaker Home Theater Set

SKU CH-XV7G-QN2BX

A seven-piece in-ceiling home-theatre set with 8-inch three-way drivers covering 40 Hz to 20 kHz at 95 dB, flush-mounted via a hardware-free Pressure Lock system into 9.45-inch cut-outs

  • TypeIn-Ceiling Speakers
  • Wide sound dispersion integrates with any audio system
  • Traditional passive design powered by your receiver or amp
  • 3-way woofer, midrange and tweeter for full-range coverage
  • Pressure Lock mounting clamps to drywall without hardware
  • Paintable grilles and ABS housings match your décor

Seven-Speaker In-Ceiling Set

This seven-piece home-theater system places flush-mount speakers overhead for a front, centre and surround layout. The passive design draws power from any receiver or amplifier with raw speaker-wire outputs. It is intended for buyers who want discreet, whole-room audio without floor-standing cabinets.

Flush Mount With Pressure Lock

Each unit clamps to drywall through a 9.45" cut-out using a tool-free Pressure Lock mechanism that requires no separate hardware. The 3.78" mounting depth fits standard joist bays, and the 10.83" overall diameter covers the opening cleanly. Spring-loaded terminals accept bare wire, while paintable ABS housings and removable grilles blend with any ceiling finish.

Passive 3-Way Frequency Limits

The 8" poly-cone woofers, poly-mica midranges and 13mm soft-dome tweeters are crossed over at factory-set points for a stated 40Hz–20 kHz response at 95 dB sensitivity. Amplifier power must stay between 10 and 350 watts per channel; lower power risks insufficient headroom, while higher power can damage the passive crossovers. Buyers needing active DSP, wireless streaming or sub-40 Hz extension will need additional equipment.

Highlights

  • Wide sound dispersion integrates with any audio system
  • Traditional passive design powered by your receiver or amp
  • 3-way woofer, midrange and tweeter for full-range coverage
  • Pressure Lock mounting clamps to drywall without hardware
  • Paintable grilles and ABS housings match your décor

Specifications

BrandAcoustic Audio by Goldwood
TypeIn-Ceiling Speakers

Questions about this item

What frequency range does the 8-inch woofer cover and at what sensitivity?

The system reproduces 40 Hz to 20 kHz at 95 dB sensitivity measured at 8 ohms.

What ceiling cut-out and depth are required for the flush-mount housings?

Each speaker needs a 9.45-inch round hole and 3.78 inches of mounting depth behind the ceiling.

How do the Pressure Lock clamps secure the speakers without hardware?

The spring-loaded arms expand behind the drywall when you tighten the front screws; the mistake is not tightening them enough to engage the clamps fully.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.