Acoustic Audio
Acoustic Audio AA35CB 7 Speaker Set home audio speaker
Seven passive bookshelf speakers deliver 70 Hz–20 kHz response at 92 dB with two 3" woofers and a 1" tweeter each
- TypeCenter Channel Speaker
- 7-speaker surround set creates immersive home theatre
- 2800-watt peak power handles dynamic movie soundtracks
- 70 Hz–20 kHz range reproduces deep bass and clear highs
- 92 dB sensitivity delivers loud output from modest amplifiers
- Compact 4.125" x 9.625" x 3.875" cabinets fit on any bookshelf
Compact 7-speaker surround set
The Acoustic Audio AA35CB set supplies seven passive bookshelf speakers for a home-theatre or whole-house audio system. Each unit uses a traditional two-way design with dual 3" polypropylene woofers and a 1" soft-dome tweeter. The sealed black ABS cabinets measure 4.125" x 9.625" x 3.875" and are intended for indoor placement only. Spring-loaded raw-wire terminals accept CL3 or bare speaker cable from any compatible amplifier or receiver.
Passive operation with 20–200 W per channel
Because the speakers are passive, they draw no power themselves and produce no fan noise; thermal load and audible noise depend entirely on the driving amplifier. The manufacturer specifies that each channel of the connected amp should deliver no less than 20 watts and no more than 200 watts. Frequency response is rated at 70 Hz–20 kHz with a sensitivity of 92 dB at 8 ohms, so typical listening levels are reached with modest amplifier output.
Sealed cabinets and simple wiring
The sealed enclosure helps control bass resonance in small rooms while the spring-loaded connectors make daily cable changes quick and tool-free. Black ABS construction resists minor scuffs and blends with most décor styles. The set includes seven identical speakers and an instruction manual, covering front, centre, surround and rear channels in a single purchase. Buyers who need powered speakers, wireless connectivity, outdoor-rated enclosures or a dedicated subwoofer should look elsewhere.
Highlights
- 7-speaker surround set creates immersive home theatre
- 2800-watt peak power handles dynamic movie soundtracks
- 70 Hz–20 kHz range reproduces deep bass and clear highs
- 92 dB sensitivity delivers loud output from modest amplifiers
- Compact 4.125" x 9.625" x 3.875" cabinets fit on any bookshelf
Specifications
| Brand | Acoustic Audio by Goldwood |
|---|---|
| Type | Center Channel Speaker |
Questions about this item
How do I wire the spring-loaded raw wire connectors on the AA35CB speakers, and what mistake should I avoid?
Strip each wire, push the spring tab down, insert the bare conductor, then release; the common error is leaving stray strands that can short across the positive and negative terminals.
What part of the AA35CB set is most likely to need replacement after extended use?
The foam surrounds on the two 3" polypropylene woofers can dry out and crack over time, while the 1" soft dome tweeter and sealed cabinet typically remain stable.
At what power level does the AA35CB system hit its thermal limit during long listening sessions?
The speakers are rated for 20 to 200 watts per channel; sustained operation near the 200-watt ceiling will cause the voice coils to heat up first, triggering compression or protective shutdown.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



