Acoustic Audio
Acoustic Audio AA35CB 5 Speaker Set home audio speaker
A passive 5-speaker set delivering 70Hz-20kHz frequency response at 92dB sensitivity with 20-200W power handling per channel
- TypeCenter Channel Speaker
- Full-range coverage from 70 Hz to 20 kHz
- Efficient 92 dB sensitivity at 8 ohms
- Compact 4.125" x 9.625" x 3.875" bookshelf footprint
- Works with any amp delivering 20 to 200 watts per channel
- Two 3" polypropylene woofers plus 1" soft-dome tweeter per speaker
Five-speaker bookshelf set
This five-piece bookshelf speaker set from Acoustic Audio uses a traditional passive design that draws power from an external amplifier or receiver. Each cabinet houses two 3-inch polypropylene woofers and a 1-inch soft dome tweeter in a two-way configuration. The sealed ABS enclosures measure 4.125 by 9.625 by 3.875 inches and finish in black with spring-loaded raw wire connectors. They are intended for indoor use only.
Wired into any amp or receiver
Connect the speakers to any amplifier, home receiver or stereo that provides raw speaker wire outputs using CL3 or raw speaker wire. The system requires 20 to 200 watts per channel from the driving unit. This arrangement suits home theatre surround sound, whole-house audio or business and retail installations without needing a dedicated power outlet at each speaker location.
Sustained output at rated sensitivity
Frequency response spans 70 Hz to 20 kHz at a sensitivity of 92 dB measured at 8 ohms. The 2000 watt peak rating reflects short-term capability rather than continuous power handling. Under prolonged listening sessions the sealed cabinets and polypropylene drivers maintain consistent output without the thermal compression sometimes seen in ported designs.
Highlights
- Full-range coverage from 70 Hz to 20 kHz
- Efficient 92 dB sensitivity at 8 ohms
- Compact 4.125" x 9.625" x 3.875" bookshelf footprint
- Works with any amp delivering 20 to 200 watts per channel
- Two 3" polypropylene woofers plus 1" soft-dome tweeter per speaker
Specifications
| Brand | Acoustic Audio |
|---|---|
| Type | Center Channel Speaker |
Questions about this item
What is the lowest frequency the speakers can reproduce before bass output drops off?
The frequency response starts at 70 Hz, so deep bass below that will not be reproduced by these speakers.
How much heat or noise do the speakers add to a room when driven continuously?
Passive speakers have no internal amplifier or fan, so they generate no electrical noise and negligible heat during all-day use.
What minimum amplifier power per channel is required to drive this set properly?
Your amplifier or receiver must supply at least 20 watts per channel into 8 ohms to meet the speaker's power requirement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



