Acoustic Audio
Acoustic Audio AA35CB 3-Way Bookshelf Speaker Pair 800W Black
A compact bookshelf pair with two 3″ woofers and a 1″ soft-dome tweeter, rated 70 Hz–20 kHz at 92 dB and 20–200 W per channel
- TypeCenter Channel Speaker
- Compact bookshelf design fits tight spaces with 4.125" height
- 800 W peak power delivers loud, clear audio for home theater
- 70 Hz–20 kHz range covers deep bass to crisp highs
- 92 dB sensitivity produces strong volume from modest amplifier power
- Passive wiring works with any amp or receiver using raw speaker wire
Compact Passive Bookshelf Pair
The Acoustic Audio AA35CB is a two-speaker passive set designed for indoor stereo or surround installations. Each cabinet houses two 3" polypropylene woofers and a 1" soft dome tweeter in a sealed ABS enclosure. The system handles up to 800 watts peak power and delivers a 70Hz-20 kHz frequency response at 92dB sensitivity. These speakers suit home theatre, whole-house audio or commercial background music systems.
Amplifier And Wiring Check
Your amplifier or receiver must provide raw speaker wire outputs with 20 to 200 watts per channel into 8 ohms. Verify you have CL3-rated or standard raw speaker cable for the connection. The spring-loaded terminals accept bare wire only, so banana plugs or spades cannot be used. Confirm your existing gear meets the minimum power requirement before ordering.
Sealed Cabinets And Spring Terminals
The black ABS sealed cabinets measure 4.125" high by 9.625" wide by 3.875" deep each, allowing discreet shelf or stand placement. Spring-loaded raw wire connectors make initial wiring fast but require a secure twist for long-term reliability. The sealed alignment avoids port noise but limits deep bass extension below 70Hz. Not rated for outdoor or damp environments.
Highlights
- Compact bookshelf design fits tight spaces with 4.125" height
- 800 W peak power delivers loud, clear audio for home theater
- 70 Hz–20 kHz range covers deep bass to crisp highs
- 92 dB sensitivity produces strong volume from modest amplifier power
- Passive wiring works with any amp or receiver using raw speaker wire
Specifications
| Brand | Acoustic Audio by Goldwood |
|---|---|
| Type | Center Channel Speaker |
Questions about this item
What comes in the box with the Acoustic Audio AA35CB speaker pair and do I need to buy speaker wire separately?
The box contains two passive speakers and an instruction manual. You must supply CL3 or raw speaker wire and an amplifier or receiver with raw speaker wire outputs.
The product title mentions 800 W — does that mean each speaker handles 800 watts?
The 800 W figure is a system peak rating. Each speaker is designed for 20 to 200 watts per channel from your amplifier, so choose an amp within that range.
How loud will these speakers play in a typical room with a 100 W per channel receiver?
With 92 dB sensitivity at 8 ohms and a 70 Hz–20 kHz response, a 100 W per channel amp will drive them to strong listening levels in small to medium rooms.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



