Acoustic Audio
Acoustic Audio AA35CB 3-Way Bookshelf 3-Speaker Set 1200W
Three passive bookshelf speakers deliver 70 Hz – 20 kHz frequency response at 92 dB sensitivity, handling 20 – 200 W per channel from any amplifier
- TypeCenter Channel Speaker
- Full-range audio from 2-way tweeter and woofer design
- Compact bookshelf size fits tight spaces at 4.125" x 9.625" x 3.875
- High 92dB sensitivity delivers loud output with less amplifier power
- Spring-loaded connectors accept raw wire for quick amp hookup
- Passive design works with any 20-200W per channel amplifier
Compact passive bookshelf trio
The Acoustic Audio AA35CB set delivers three wired passive bookshelf speakers designed for indoor surround sound or whole-house audio. Each cabinet houses two 3-inch polypropylene woofers and a 1-inch soft dome tweeter in a two-way configuration. They connect directly to any amplifier or receiver with raw speaker wire outputs.
Amplifier power window 20 to 200 watts
Your amplifier must supply no less than 20 watts and no more than 200 watts per channel to match the 8-ohm nominal impedance and 92 dB sensitivity. The frequency response spans 70 Hz to 20 kHz, covering dialogue and effects without a dedicated subwoofer. Exceeding the upper power limit risks driver damage.
Sealed ABS cabinets with spring terminals
Black sealed ABS enclosures measure 4.125 by 9.625 by 3.875 inches each, fitting tight shelves while minimising resonance. Spring-loaded raw wire terminals accept CL3 or standard speaker cable for quick, tool-free installation. The cabinets are not rated for outdoor exposure, so placement stays indoors.
Highlights
- Full-range audio from 2-way tweeter and woofer design
- Compact bookshelf size fits tight spaces at 4.125" x 9.625" x 3.875
- High 92dB sensitivity delivers loud output with less amplifier power
- Spring-loaded connectors accept raw wire for quick amp hookup
- Passive design works with any 20-200W per channel amplifier
Specifications
| Brand | Acoustic Audio |
|---|---|
| Type | Center Channel Speaker |
Questions about this item
What is the recommended amplifier power range per channel for the AA35CB speakers?
The speakers work with amplifiers delivering between 20 and 200 watts per channel.
What does the 1200-watt figure represent for this three-speaker set?
It is the combined peak power handling across all three passive speakers.
What connection type do the spring-loaded terminals accept?
They accept raw speaker wire or CL3-rated cable for a direct wired link to your amplifier.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



