We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of compact black rectangular speakers with U-shaped mounting brackets

Acoustic Audio

Acoustic Audio AA351B 2-Way Indoor Outdoor Speakers Pair Black

SKU CH-02F6-B6189

A weatherproof on-wall pair with 2-way drivers delivers 100 Hz–20 kHz frequency response and 89 dB sensitivity for indoor or outdoor installations

  • TypeOn-Wall Speakers
  • Weather-resistant cabinets withstand rain, snow, sun and ice
  • 2-way design with poly mica woofers and PEI dome tweeters delivers full-range sound
  • 89 dB sensitivity produces big volume from compact 6" x 4.25" x 4" enclosures
  • Handles 20 to 250 watts per channel for flexible amplifier matching
  • Easy-install U-brackets and spring-loaded connectors simplify setup on any wall

Indoor Outdoor Pair

The Acoustic Audio AA351B is a pair of passive on-wall speakers built for stereo or surround installations inside or outside the home. Black ABS cabinets seal the drivers against rain, snow and sun while the 2-way layout handles music and dialogue alike.

Check Amplifier And Wiring

Your amplifier or receiver must supply between 20 and 250 watts per channel into 8 ohms and provide raw speaker wire outputs. You will also need CL3-rated or standard speaker cable to run from the amp to each cabinet.

Brackets Enable Fixed Mounting

The included U-shaped brackets and hardware let you secure each 6 by 4.25 by 4 inch cabinet to a wall or ceiling. Once mounted the speakers stay aimed at the listening area, and the spring-loaded terminals accept bare wire without extra connectors.

Highlights

  • Weather-resistant cabinets withstand rain, snow, sun and ice
  • 2-way design with poly mica woofers and PEI dome tweeters delivers full-range sound
  • 89 dB sensitivity produces big volume from compact 6" x 4.25" x 4" enclosures
  • Handles 20 to 250 watts per channel for flexible amplifier matching
  • Easy-install U-brackets and spring-loaded connectors simplify setup on any wall

Specifications

BrandAcoustic Audio by Goldwood
TypeOn-Wall Speakers

Questions about this item

What comes in the box and what do I need to buy separately?

The box contains two passive speakers, mounting brackets with hardware, and an instruction manual. You must supply an amplifier or receiver with raw speaker wire outputs, plus CL3 or raw speaker wire to connect them.

Which power rating should I match my amplifier to?

Your amplifier should deliver between 20 and 250 watts per channel into 8 ohms. The 500 W figure in the title is a peak system number, not the continuous power you need to plan for.

What does the 89 dB sensitivity mean for real-world volume?

At 89 dB sensitivity, these speakers produce moderate volume with typical home-theatre receivers. You will need an amp toward the upper end of the 20–250 W range for loud outdoor playback or large rooms.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.