Acoustic Audio
Acoustic Audio AA321B 14 Mountable Speakers 2800W
Fourteen mountable passive speakers deliver 2.5" woofers and 88 dB sensitivity for whole-house or surround sound
- TypeOn-Wall Speakers
- 14 speakers deliver room-filling sound from a single pack
- 2800 W total power handles demanding home-theatre setups
- 5" polypropylene woofers produce clear mid-range and bass
- 88 dB sensitivity ensures loud output with modest amplifier power
- Omni-directional brackets with hardware make wall mounting quick and secure
14 Speakers for Whole-House Audio
The Acoustic Audio AA321B set supplies fourteen passive on-wall speakers designed for multi-room installations, home-theatre surround systems or commercial background music. Each cabinet houses a 2.5" polypropylene woofer and presents an 8 Ω load with 88 dB sensitivity. The sealed ABS enclosures measure 3.5" x 3.5" x 4.5" and are finished in black. They are rated for indoor use only.
Omni-Directional Brackets Simplify Placement
Included mounting brackets with hardware allow each speaker to be aimed for even coverage across seating areas or retail zones. Spring-loaded raw-wire terminals accept bare conductor or CL3 cable without soldering. The package also contains an instruction manual. No amplifier, receiver or speaker wire is supplied, so those must be sourced separately.
Straightforward Wired Install With Power Limits
Installation consists of securing brackets, running CL3 or raw speaker wire from the amplifier to each terminal, and tightening the spring clips. The amplifier must deliver between 20 W and 200 W per channel; exceeding or falling below this range can damage the drivers or produce weak output. Ensure polarity is consistent across all fourteen units to maintain phase coherence.
Highlights
- 14 speakers deliver room-filling sound from a single pack
- 2800 W total power handles demanding home-theatre setups
- 5" polypropylene woofers produce clear mid-range and bass
- 88 dB sensitivity ensures loud output with modest amplifier power
- Omni-directional brackets with hardware make wall mounting quick and secure
Specifications
| Brand | Acoustic Audio by Goldwood |
|---|---|
| Type | On-Wall Speakers |
Questions about this item
Do the spring-loaded wire terminals need periodic tightening?
The terminals use a spring-loaded design that holds bare wire without screws, so no tightening is required.
What limits how loud these 150 Hz – 20 kHz speakers can play continuously?
The amplifier must supply 20 – 200 watts per channel; exceeding that range risks thermal compression or driver damage.
How warm do the sealed ABS cabinets get during all-day use?
The sealed cabinets dissipate heat passively; with 88 dB sensitivity they run warm but not hot at typical listening levels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



