Acesori K2 Wireless Gaming Headset Red 2.4GHz Bluetooth 5.3 50mm 100h
Over-ear headset with 50 mm drivers, 2.4 GHz wireless and Bluetooth 5.3 for up to 100 hours play time
- TypeOver the Ear
- ColorRed
- Driver Unit50 millimeters
- Frequency Response5Hz-20KHz
- THDOver Ear
- Input Impedance32 ohms
- Low-latency 2.4 GHz link at 15 ms for competitive gaming
- 50 mm drivers deliver immersive 3D stereo sound positioning
- Up to 100 hours battery life on Bluetooth for marathon sessions
- Lightweight 350 g frame with memory-foam cushions for all-day comfort
- Noise-cancelling boom mic with 270° adjustment and one-tap mute
Multi-platform wireless headset
The Acesori K2 is a red over-ear headset built for gaming on PS5, PS4, PC and Switch. It connects through a 2.4GHz USB dongle or Bluetooth 5.3 and also offers a 3.5mm wired option for Xbox controllers and mobile devices. The 50mm drivers deliver a 5Hz-20KHz frequency response at 32 ohms impedance.
Sustained wireless performance
The 2.4GHz link maintains latency under 15ms for competitive titles such as CoD, Fortnite and Apex. Battery life reaches 80 hours on the dongle and 100 hours over Bluetooth, while a 10-minute charge restores roughly three hours of play. Wireless functions are disabled during charging, so only wired mode remains available.
Thermals noise and power
Weighing 350 grams with oversized memory foam cushions, the headset stays cool during extended sessions. The unidirectional boom microphone rotates 270 degrees and includes one-tap mute to suppress keyboard and background noise. A full recharge takes four hours via the supplied cable.
Highlights
- Low-latency 2.4 GHz link at 15 ms for competitive gaming
- 50 mm drivers deliver immersive 3D stereo sound positioning
- Up to 100 hours battery life on Bluetooth for marathon sessions
- Lightweight 350 g frame with memory-foam cushions for all-day comfort
- Noise-cancelling boom mic with 270° adjustment and one-tap mute
Specifications
| Brand | Acesori |
|---|---|
| Model | K2, Acer-K2, acer-k2 |
| Part Number | acer-k2 |
| Type | Over the Ear |
| Color | Red |
| Driver Unit | 50 millimeters |
| Frequency Response | 5Hz-20KHz |
| THD | Over Ear |
| Input Impedance | 32 ohms |
| Signal to Noise Ratio(SNR) | 96 |
| Power Supply | cell, aa, lithium_ion, true |
| Sensitivity | 96 dB/mW |
| Connector | 3.5mm |
| Ear Coupling | over_ear |
| Weight | 350 grams |
| Noise Cancelling | sound_isolation |
| Wireless Type | Bluetooth |
| Battery | 100 hours |
| Operating Time | 100 hours |
| Charge Time | 4 hours |
| Distance | 10 meters |
| Contains Embedded Battery | cell |
| Microphone Impedance | ~3K ohm |
| Microphone Frequency Response | 20Hz-20KHz |
| Microphone Signal to Noise Ratio(SNR) | 96 |
| Microphone Sensitivity | 96 |
| Compatibility | pc_usb |
| Features | sound_isolation, 5.3, 100 hours, Without Cable, Volume Control, push_button, Wireless, Over Ear, dynamic_driver, 32 ohm, 10 meters |
| Windows Vista | pc_usb |
Questions about this item
How much heat or fan noise does the 2.4 GHz dongle add after a full day of gaming?
The 2.4 GHz USB dongle draws minimal power and has no fan, so it adds no noticeable heat or noise during extended sessions.
Which port must my device already have for the low-latency wireless link to work?
You need an open USB-A port for the included 2.4 GHz dongle; Bluetooth 5.3 is the alternative if USB is unavailable.
Will the 50 mm drivers and 32 ohm impedance work cleanly through my older PS4 controller's 3.5 mm jack?
Yes — the 3.5 mm cable plugs straight into a PS4 controller and the 32 ohm load is easy for the controller to drive.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



