Acer America
Acer XD1150D 180W Projector Lamp
Genuine 180 W replacement lamp module with 2,000-hour rated life for easy projector installation
- TypeProjector Lamp
- Wattage180W
- Lamp Life2,000 Hrs.
- Ready-to-install module saves setup time
- 180 watt SHP bulb powers bright projection
- 2000 hour rated life reduces replacement frequency
- Manufactured to ISO 9001 quality standards
- Compatible with Acer projectors using SP.86J01GC01
Compatible Acer XD1150D replacement lamp
The Acer XD1150D module fits Acer projectors that use the SP.86J01GC01 lamp code and ships as a complete 180W bulb-in-housing assembly. It is intended for owners who need a drop-in replacement without sourcing a bare burner and housing separately. Buyers whose projector requires a different wattage or connector cannot use this module.
Thermals noise and power in normal use
The lamp draws 180W during operation and is rated for 2,000 hours of service life under standard conditions. Heat output and fan noise will follow the projector’s own cooling design, as the module contains no independent fan or thermal sensor. No separate power specification beyond the 180W rating is provided.
Assembled housing and quality checks
The bulb comes pre-mounted in its housing, so installation requires only swapping the old module for the new one. Each unit is tested for beam performance, ignition voltage, electrical connections and run-time before shipping. The product carries no software, cables or additional accessories beyond the lamp assembly itself.
Highlights
- Ready-to-install module saves setup time
- 180 watt SHP bulb powers bright projection
- 2000 hour rated life reduces replacement frequency
- Manufactured to ISO 9001 quality standards
- Compatible with Acer projectors using SP.86J01GC01
Specifications
| Brand | Acer |
|---|---|
| Type | Projector Lamp |
| Wattage | 180W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I install the Acer XD1150D lamp module, and what step is often missed?
The module arrives as a fully assembled 180W bulb and housing. Power off the projector, let it cool completely, then remove the old lamp. Insert the new module until it clicks securely, and reset the lamp-hour counter in the menu — that reset is the step most people forget.
What maintenance or replacement will the Acer XD1150D lamp need later?
The lamp is rated for 2,000 hours of use. After that period you replace the entire module; no separate filter or bulb-only change is required for this design.
What limit appears first during extended sessions with the Acer XD1150D lamp?
The 180W lamp generates significant heat, so the projector’s thermal protection will shut the unit down if ventilation is blocked or the ambient temperature rises too high.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



