Acer America
Acer X1311PW OEM Compatible Replacement Projector Lamp 180W
A 180W replacement lamp module with housing for Acer projectors, rated for 4,000 normal or 5,000 economy hours
- TypeProjector Lamp
- Wattage180W
- Lamp Life4,000 (Normal) - 5,000 (Economy) Hrs.
- Ready-to-install module saves setup time
- 180 W P-VIP bulb matches original brightness
- 4 000 hrs normal / 5 000 hrs economy mode
- Manufactured to ISO 9001 quality standards
- Fits Acer projectors using EC.JCQ00.001
Ready-to-install lamp module
The Acer X1311PW compatible replacement lamp arrives as a complete 180W P-VIP bulb and housing assembly. It matches the original EC.JCQ00.001 specification so you can swap the module without handling a bare bulb.
OEM-grade build and simple mounting
Each unit is produced under ISO 9001 controls and tested for beam performance, ignition, voltage, connections and run-time. The pre-assembled housing slides into the projector’s lamp compartment and locks with the existing screws, requiring no extra tools or adapters.
Check your projector model and hours setting
Verify that your Acer projector lists the X1311PW or EC.JCQ00.001 as the correct lamp code before ordering. The module is rated for 4000 hours in normal mode and 5000 hours in economy mode, so confirm which mode your installation uses to plan replacement intervals.
Highlights
- Ready-to-install module saves setup time
- 180 W P-VIP bulb matches original brightness
- 4 000 hrs normal / 5 000 hrs economy mode
- Manufactured to ISO 9001 quality standards
- Fits Acer projectors using EC.JCQ00.001
Specifications
| Brand | Acer |
|---|---|
| Type | Projector Lamp |
| Wattage | 180W |
| Lamp Life | 4,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
What wattage is the P-VIP bulb in this X1311PW lamp module?
The module ships with a new 180W P-VIP bulb already seated in the housing.
Which Acer projector models accept the EC.JCQ00.001 lamp assembly?
It is built for the Acer X1311PW projector; verify your projector’s service manual for the exact part number.
Do I need to reset the lamp-hour counter after fitting this replacement?
Yes — after installation, open the projector menu and reset the lamp timer so the 4,000/5,000-hour ratings track correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



