Acer America
Acer PH730 projector lamp 230W 2000Hrs
OEM replacement lamp module with a 230 W Osram P-VIP bulb rated for 2 000 hours of use
- TypeProjector Lamp
- Wattage230W
- Lamp Life2,000 Hrs.
- Ready to install with pre-assembled housing
- 230W Osram P-VIP bulb powers bright projection
- 2,000 hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Compatible with Acer PH730 projector model
Acer PH730 230W Replacement Lamp
This Acer PH730 lamp is a 230W replacement module for Acer projectors. It arrives as a complete bulb-and-housing assembly ready for direct installation. The lamp uses a genuine Osram P-VIP bulb rated for 2,000 hours of operation. It is built to ISO9001 quality standards and carries an 180-day warranty.
Projector Owners Needing a Direct-Fit 230W Module
The lamp suits owners of compatible Acer projectors who need a 230W replacement that fits without modification. It is not for users whose projector requires a different wattage or housing design. Buyers wanting a bare bulb without the housing should look elsewhere.
230W Osram P-VIP Bulb Rated for 2,000 Hours
The single specification that decides fit is the 230W Osram P-VIP bulb rated for 2,000 hours. Your projector must accept this exact wattage and lamp type. Verify the part number SP.83R01G.001 against your projector manual before ordering.
Highlights
- Ready to install with pre-assembled housing
- 230W Osram P-VIP bulb powers bright projection
- 2,000 hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Compatible with Acer PH730 projector model
Specifications
| Brand | Acer |
|---|---|
| Type | Projector Lamp |
| Wattage | 230W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which Acer projectors accept the PH730 lamp module with SP.83R01G.001?
This lamp module is built for Acer projectors that specify the PH730 part number SP.83R01G.001; check your projector’s service guide to confirm compatibility.
Will the 230W P-VIP bulb run in a projector that originally used a lower-wattage lamp?
No, the projector must be designed for a 230W P-VIP lamp; using it in a unit rated for a different wattage can cause ignition or thermal problems.
How do I confirm the lamp is operating correctly after installation?
Reset the projector’s lamp-hour counter, then verify the on-screen timer starts from zero and the image reaches full brightness without flicker.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



