Acer America
Acer EY.JBU01.039 180W Projector Lamp
Ready-to-install 180 W replacement lamp module with Osram P-VIP bulb, rated for 3,000 normal or 5,000 economy hours
- TypeProjector Lamp
- Wattage180W
- Lamp Life3,000 (Normal) - 5,000 (Economy) Hrs.
- Ready-to-install module saves setup time
- Genuine Osram P-VIP 180W bulb ensures original brightness
- 3000 hours normal life extends replacement interval
- 5000 hours economy mode lowers operating cost
- Manufactured to ISO 9001 quality standards
Genuine 180W Replacement Lamp
The Acer EY.JBU01.039 module supplies a complete 180W P-VIP bulb inside its original housing, designed for owners of compatible Acer projectors who need a direct, factory-matched replacement. It arrives fully assembled so the projector can return to service immediately.
Ready-to-Install Housing
Because the bulb is pre-mounted in the correct housing, no separate alignment or handling of a bare lamp is required; the unit seats into the projector exactly as the original did. Manufacturing follows ISO 9001 checks covering beam performance, ignition, voltage, connections and run-time.
Rated 3000 to 5000 Hours
In normal mode the lamp is rated for 3000 hours of use, while economy mode extends the rating to 5000 hours, giving operators a clear choice between maximum brightness and longer intervals between changes. No additional cables, tools or software are included in the package.
Highlights
- Ready-to-install module saves setup time
- Genuine Osram P-VIP 180W bulb ensures original brightness
- 3000 hours normal life extends replacement interval
- 5000 hours economy mode lowers operating cost
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | Acer |
|---|---|
| Type | Projector Lamp |
| Wattage | 180W |
| Lamp Life | 3,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
What projector lamp wattage does the 180W module use?
The replacement lamp operates at 180W, matching the original projector specification for brightness and power draw.
What housing style does the EY.JBU01.039 module use for mounting?
It ships as a complete bulb-and-housing assembly designed to drop into the projector’s lamp compartment without separate bracket work.
How do you install the Acer EY.JBU01.039 lamp, and which step is most often missed?
Power off and cool the projector, remove the lamp cover, swap the module, replace the cover, then reset the lamp-hour counter in the menu so the 3000 or 5000 hour rating tracks correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



