Acer America
Acer EC.JCQ00.001 Projector Lamp 180W 4000-5000 Hrs
A new 180 W replacement lamp module with housing delivers 4,000 to 5,000 hours of projector runtime
- TypeProjector Lamp
- Wattage180W
- Lamp Life4,000 (Normal) - 5,000 (Economy) Hrs.
- Ready to install with bulb and housing assembled
- 180W P-VIP lamp delivers specified brightness
- Up to 5000 hours life in economy mode
- 4000 hours rated life in normal mode
- New OEM-compatible replacement for Acer EC.JCQ00.001
Ready-to-install lamp module
The Acer EC.JCQ00.001 is a complete projector lamp assembly that pairs a new P-VIP 180W bulb with its housing. It is designed for owners of compatible Acer projectors who need a drop-in replacement without separate bulb handling. The unit arrives fully assembled so installation takes only a few minutes.
Lamp life and power
The lamp draws 180W and is rated for 4000 hours in normal mode or 5000 hours in economy mode. Running the projector in economy extends usable life while reducing heat output and fan noise during typical presentations or home viewing. Normal mode delivers maximum brightness for well-lit rooms at the cost of shorter lamp duration.
Fit and compatibility
This module is built to match the original form factor so it seats directly in the projector's lamp compartment with no adapter required. Buyers who need a different wattage or a bare bulb without housing should look elsewhere. The lamp is manufactured to ISO 9001 quality standards and undergoes checks for ignition, voltage and run-time before shipping.
Highlights
- Ready to install with bulb and housing assembled
- 180W P-VIP lamp delivers specified brightness
- Up to 5000 hours life in economy mode
- 4000 hours rated life in normal mode
- New OEM-compatible replacement for Acer EC.JCQ00.001
Specifications
| Brand | Acer |
|---|---|
| Type | Projector Lamp |
| Wattage | 180W |
| Lamp Life | 4,000 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
How do I install the Acer EC.JCQ00.001 lamp module and what step is often missed?
Power off and unplug the projector, let it cool completely, remove the lamp cover, release the retaining screws, slide out the old module, insert the new 180W assembly until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the step most people forget.
What maintenance or replacement will this 180W P-VIP lamp need later?
The lamp itself is the only replaceable consumable; after 4,000 hours in normal mode or 5,000 hours in economy mode the brightness drops to roughly half and the module must be swapped for a new EC.JCQ00.001 unit — no filter cleaning or separate bulb change is required.
What limit appears first during long sessions with this 180W lamp?
Thermal protection triggers first; if the projector’s airflow is restricted or the ambient temperature rises, the lamp will dim or shut down to protect the 180W P-VIP bulb before the rated 4,000- or 5,000-hour life is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


