Acer America
Acer America X100 OEM Replacement Projector Lamp 180W Osram P-VIP
OEM replacement lamp module with Osram P-VIP 180 W bulb, rated 2,500 to 4,000 hours
- TypeP-VIP
- Wattage180W
- Lamp Life2,500 (Normal) - 4,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- 180 W Osram P-VIP lamp delivers bright projection
- Up to 4000 hours life in Economy mode
- 2500 hours normal use before replacement needed
- Built to ISO 9001 quality standards for reliability
Direct replacement lamp module
The Acer X100 replacement lamp ships as a fully assembled bulb and housing unit, model EC.K0100.001, so it fits straight into compatible Acer projectors without extra assembly. It uses a genuine Osram P-VIP 180 W bulb built to ISO 9001 quality checks for beam performance, ignition, voltage and run-time.
Projector owners needing a like-for-like swap
This module suits anyone whose Acer projector requires the X100 lamp and who wants the original 180 W Osram light source with the factory housing. It is not for users who need a different wattage, a bare bulb without housing, or a lamp designed for another projector brand or model series.
Simple slide-in installation
Because the bulb comes pre-mounted in its housing, installation typically means opening the projector lamp door, removing the old module and sliding the new one into place. The most common issue is forgetting to reset the projector lamp-hour counter after fitting the new unit, which can leave the replacement warning active.
Highlights
- Ready to install with pre-assembled bulb and housing
- 180 W Osram P-VIP lamp delivers bright projection
- Up to 4000 hours life in Economy mode
- 2500 hours normal use before replacement needed
- Built to ISO 9001 quality standards for reliability
Specifications
| Brand | Acer |
|---|---|
| Type | P-VIP |
| Wattage | 180W |
| Lamp Life | 2,500 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Which Acer projector models accept the EC.K0100.001 lamp module?
The EC.K0100.001 module is built for the Acer X100 projector. It arrives as a complete bulb-and-housing unit so it fits directly into that model without extra parts.
Will the 180 W Osram P-VIP lamp run in the same projector that previously used a lower-wattage module?
The 180 W P-VIP lamp is specified for the X100. Using it in a projector designed for a different wattage can cause ignition or thermal issues, so match the original wattage.
How do I confirm the new lamp is operating correctly after installation?
Reset the projector's lamp-hour counter, then verify brightness and stable ignition. Expect up to 2,500 hours in Normal mode or 4,000 hours in Economy mode before replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


