Acer America
Acer America 135W 19.5V AC Adapter Charger & Cord
Genuine 135W 19.5V AC adapter with 1.7x5.5mm tip powers compatible Acer Aspire, Nitro, ConceptD and Veriton laptops
- AC Adapter Voltage19V
- AC Adapter Current3.42A
- AC Adapter Output Power65W
- Genuine Acer adapter powers compatible laptops reliably
- 135 watt output meets high-performance charging needs
- 5 volt 1.7x5.5mm tip fits listed models
- Replaces multiple KP part numbers for easy matching
- New condition ensures full manufacturer specifications
Genuine 135 W Acer adapter with 1.7 × 5.5 mm tip
This new 135 watt AC adapter delivers 19.5 V at 3.42 A for compatible Acer laptops. It replaces part numbers KP.1350H.001, KP.13501.008 and the full list of KP.1350H and KP.13503 variants. The package includes the power cord so the unit is ready to use.
Suits owners of listed Aspire, ConceptD.
Buyers whose laptop requires a different voltage, a higher wattage or a tip size other than 1.7 × 5.5 mm should look elsewhere. The adapter is not suitable for devices that use USB-C power delivery or proprietary connectors not shown in the compatibility list.
Output fixed at 135 W and 19.5 V
The single deciding specification is the 135 watt, 19.5 volt output with a 1.7 × 5.5 mm barrel tip. Match this rating and connector to the original charger before purchasing.
Highlights
- Genuine Acer adapter powers compatible laptops reliably
- 135 watt output meets high-performance charging needs
- 5 volt 1.7x5.5mm tip fits listed models
- Replaces multiple KP part numbers for easy matching
- New condition ensures full manufacturer specifications
Specifications
| Brand | Acer |
|---|---|
| AC Adapter Voltage | 19V |
| AC Adapter Current | 3.42A |
| AC Adapter Output Power | 65W |
Questions about this item
Will the 1.7x5.5x11 mm barrel tip wear out and need replacement?
The 1.7x5.5x11 mm tip is a standard barrel connector; it only needs replacement if the pin bends or the sleeve cracks from physical stress.
What limits continuous 135 W output — the 19.5 V rail or the 3.42 A rating on the label?
The adapter is rated for 135 W at 19.5 V; sustained loads at that level are limited by the internal thermal design, not by the 3.42 A figure shown on the 65 W spec line.
How hot or loud does the brick get when powering a Nitro AN515-55 all day?
The brick runs warm but silent — it has no fan, so heat is dissipated through the case surface during continuous use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



