We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dark gray aluminum M.2 NVMe enclosure with built-in cooling fan

Acasis

Acasis TB501 Pro 80Gbps M.2 NVMe SSD enclosure with fan

SKU CH-CF1Y-YY556

Houses a single M.2 NVMe SSD in aluminium with a fan that starts at 55 °C and reaches 6000 MB/s via Thunderbolt 5 and USB4 2.0

  • ColorDark Gray
  • TypeExternal Hard Drive Enclosure
  • MaterialAluminum
  • External InterfaceThunderbolt
  • HDD Count SupportedSingle SSD
  • JHL9480 Thunderbolt chip enables high performance and stability
  • Read and write speeds up to 6000 MB/s with PCIe 4.0 x4 NVMe 1.4 SSD
  • Works with Thunderbolt 5, USB4 2.0 and earlier Thunderbolt and USB standards
  • Driver-free plug and play setup saves time
  • Built-in fan activates automatically at 55 °C for cooling

Acasis TB501 Pro 80Gbps Enclosure

This new aluminium enclosure houses a single M.2 NVMe SSD and connects through an 80Gbps Thunderbolt interface. The JHL9480 chip drives the unit and a built-in fan starts automatically at 55°C to keep temperatures in check during heavy workloads.

Suited for fast external storage.

Content creators, developers and IT professionals who need up to 6000 MB/s sequential transfers will benefit when pairing the enclosure with a PCIe 4.0 x4 NVMe 1.4 or newer drive. It is not compatible with M.2 key adapters used to connect PCIe expansion cards.

Thunderbolt 5 and USB4 2.0 support defines

The enclosure reaches its peak throughput on hosts that implement Thunderbolt 5 or USB4 2.0, while remaining backward compatible with Thunderbolt 4, Thunderbolt 3, USB4 1.0 and USB 3.2, 3.1 and 3.0 ports.

Highlights

  • JHL9480 Thunderbolt chip enables high performance and stability
  • Read and write speeds up to 6000 MB/s with PCIe 4.0 x4 NVMe 1.4 SSD
  • Works with Thunderbolt 5, USB4 2.0 and earlier Thunderbolt and USB standards
  • Driver-free plug and play setup saves time
  • Built-in fan activates automatically at 55 °C for cooling

Specifications

ColorDark Gray
TypeExternal Hard Drive Enclosure
MaterialAluminum
External InterfaceThunderbolt
HDD Count SupportedSingle SSD

Questions about this item

What M.2 keying and length does the TB501 Pro enclosure accept?

It supports single M.2 NVMe SSDs with B+M M-key; the supplied standoffs and screw match standard 2230, 2242, 2260 and 2280 lengths.

How is the JHL9480 enclosure connected to the host and what step do users often miss?

Plug the included Thunderbolt cable into a Thunderbolt 5, USB4 V2.0, Thunderbolt 4/3 or USB4 V1.0 port; the step many miss is using a certified 80Gbps cable to reach 6000 MB/s.

When will the built-in fan need attention and what maintenance is required?

The fan spins up automatically at 55°C; clean dust from the aluminium vents every few months with compressed air to keep airflow steady.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.